667224

Viking MB 253 Manual

39
Zoom out
Zoom in
Previous page
1/269
Next page
37
DEFRNLITESPTNOSVFIDASKCSEL EN
0478 111 9922 B - EN
10.1 Starting the engine
Start procedure when the engine is
cold:
● Only for MB 248, MB 248 T:
Press the primer (1) three times.
● Press the motorstop lever (2) to the
handlebar and hold.
● Slowly pull out the recoil starter rope (3)
to the point of compression resistance.
Then pull forcefully and quickly to arm's
length. Slowly return the recoil starter
rope (3) again so that it is rolled up
again.
Repeat the procedure until the engine
starts.
Start procedure when the engine is
warm:
● The start procedure is the same as
when the engine is cold.
Only for MB 248, MB 248 T:
However, it is not necessary to press
the primer (1).
10.2 Stopping the engine
To stop the engine, release the
motorstop lever (15).
Engine and mowing blade come to a stop
after a short run-down time.
10.3 Self-propulsion lever
(MB 248 T, MB 253 T)
Switching on self-propulsion:
● Start the engine. (Ö 10.1)
● Pull the self-propulsion lever (1) to the
handlebar and hold.
Self-propulsion is switched on and the
lawn mower moves forwards.
Switching off self-propulsion:
● Release the self-propulsion lever (1).
Self-propulsion is switched off and the
lawn mower comes to a standstill. The
engine continues to run.
10.4 Level indicator
The upper part of the grass catcher
box features a level indicator (1).
The flow of air that is created by the rotary
movement of the mowing blade and is
responsible for filling the grass catcher box
raises the level indicator (2):
The grass catcher box is filled with
clippings.
When the grass catcher box is full, this
flow of air is reduced and the level
indicator drops (3):
● Empty filled grass catcher box (Ö 10.5).
10.5 Emptying the grass catcher
box
● Detach the grass catcher box. (Ö 7.6)
● Hold the grass catcher box by the
handles (1) and (2) and empty it of
clippings.
● Ensure that flap (3) is properly closed.
Attach the grass catcher box. (Ö 7.6)
11.1 General
Annual service by the specialist dealer:
The lawn mower should be inspected once
annually by a specialist dealer. VIKING
recommends VIKING specialist dealers.
11.2 Cleaning the machine
Maintenance interval:
After each use
10. Operating the machine
Avoid damage to the machine.
Do not start the engine in tall grass
or at the lowest cutting height. This
makes starting difficult.
Thanks to the fixed throttle setting,
the engine always operates at the
optimum working speed after
starting.
Avoid damage to the machine.
The primer must no longer be
pressed when the engine is warm.
It should be remembered, however,
that the engine can cool down
rapidly in very cold weather.
9
1
10
11
Risk of injury!
The engine must be stopped for
safety reasons before removing the
grass catcher box.
11. Maintenance
Risk of injury!
Observe the safety instructions in
the section "For your safety" (Ö 4.).
12
13
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MB 253 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MB 253 in the language / languages: All languages as an attachment in your email.

The manual is 11,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info