Manual Viking MB 248T (page 32 of 269) (All languages)

667223

Zoom out

Zoom in

1/269

0478 111 9922 B - EN

Petrol must only be stored in appropriate,

tested containers (canisters). Always

screw on the fuel tank and canister caps

properly and tightly. Defective caps must

be replaced for safety reasons.

Never use beverage bottles or similar for

disposal or storage of fuels and lubricants.

Persons, particularly children, could be

tempted to drink out of them.

Keep petrol away from sparks,

naked flames, pilot lights, heat

sources, and other ignition

sources. Do not smoke!

Refill the tank out-of-doors and do not

smoke during refilling.

Before refilling the tank, stop the engine

and allow it to cool.

Refilling with petrol must be performed

before the engine is started. When the

engine is running or is hot, the tank cap

must not be removed and the tank must

not be refilled with petrol.

Do not fill the fuel tank completely, but fill

to approx. 4 cm below the edge of the filler

neck so that the fuel has room to expand.

If petrol is spilled, the engine must only be

started after the petrol-contaminated area

has been cleaned. All attempts at starting

must be avoided until the petrol fumes

have dispersed (wipe dry).

Any spilt fuel must be wiped up

immediately.

Clothing must be changed if it comes into

contact with petrol.

Never store the machine with petrol in the

tank inside a building. The resulting petrol

fumes could come into contact with naked

flames or sparks and could be ignited.

If it is necessary to drain the tank, this must

be done out of doors.

4.3 Clothing and equipment

Always wear sturdy footwear

with high-grip soles when

working. Never work barefoot

or, for example, in sandals.

Also always wear sturdy gloves

and tie up and secure long hair

(headscarf, cap, etc.) when

performing maintenance and

cleaning work or when transporting the

machine.

Wear suitable safety glasses

when sharpening the mowing

blade.

Always wear long trousers and

tight-fitting clothing when operating the

machine.

Never wear loose clothes which may

become caught on moving parts (control

levers) – do not wear jewellery, ties or

scarves.

4.4 Transporting the machine

Always wear gloves in order to prevent

injuries due to sharp-edged and hot

components.

Do not transport the machine with the

engine running. Switch off the engine, let

the blades come to a standstill and remove

the spark plug socket prior to transport.

Only transport the machine once the

engine has cooled down and with an

empty fuel tank.

Use suitable loading aids (loading ramps,

lifters).

Secure the machine and any machine

components being transported (e.g. grass

catcher box) on the load floor using

fastening material of adequate size (belts,

ropes, etc.).

Avoid contact with the mowing blade when

lifting and carrying the machine.

Observe the information in the section

"Transport". It describes how to lift and

lash the machine. (Ö 12.)

When transporting the machine, always

observe regional legislation, especially

regarding load security and the transport

of objects on load floors.

4.5 Before operation

Make sure that only persons who are

familiar with the instruction manual are

permitted to use the machine.

Check the fuel system (particularly visible

parts such as e.g. tank, tank cap, hose

connections) before operating the

machine. In the event of any leaks or

damage, do not start the engine – fire

hazard!

Have the machine repaired by a specialist

dealer prior to operation.

Observe the local regulations regarding

permitted operating times for gardening

power tools with combustion engines or

electric motors.

Carefully inspect the complete area on

which the machine is to be used and

remove any stones, sticks, wires, bones

and other foreign objects which could be

thrown up by the machine. Obstacles (e.g.

tree stumps, roots) can be easily

overlooked in long grass.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viking MB 248T in the language / languages: All languages as an attachment in your email.

The manual is 11,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viking MB 248T Manual

Product: