Manual Viking MA 443C (page 44 of 290) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian)

667210

Zoom out

Zoom in

1/290

0478 131 9922 D - EN

● Check correct assembly:

The quick-clamping devices (E) must

be sufficiently tightened so that they are

pressed tightly against the handlebar

and the upper handlebar is firmly

connected to the lower handlebar.

If the handlebar is not firmly installed or

the quick-clamping devices are not

correctly located, open the quick-

clamping devices and turn them until

they are securely fastened.

● Insert the electric cable (3) into the

holder (4) of the handlebar console as

shown.

Installing the cable clip:

● Press the cable clip (H) onto the upper

handlebar. Distance between the cable

clip and switch:

25 - 27 cm

Insert the electric cable (3) into the

cable clip (H) as shown, close the

tab (5) and allow it to engage.

7.4 Assembling the grass

catcher box

● Fit the upper part of the grass

catcher box (B) onto the lower part of

the grass catcher box (C). Ensure

correct location in the guides.

● Push pin (D) through the bores

provided from inside.

● Allow the upper part of the grass

catcher box (B) to engage in the lower

part of the grass catcher box using

slight pressure.

● Attach the grass catcher box (Ö 9.5).

8.1 General

The MA 443 and MA 443 C lawn mowers

are operated with rechargeable batteries.

Only high-quality STIHL lithium-ion

batteries of the type AP are used.

The batteries (supplied in some cases) are

optimally adapted to the intended purpose,

however, all batteries of the type AP can

be used.

The lawn mower electronics exchange

data with the installed battery and adapt

the power of the electric motor to the

relevant capacity.

8.2 Connecting charger to the

mains

● Insert mains plug (1) in

socket (2).

● After connection of the charger to the

power supply, a self-test is performed.

During this process, the LED (3) on the

charger illuminates green for approx.

1 second, then red, and then

extinguishes again (Ö 8.6).

8.3 Removing/installing battery

● Open battery compartment

and disconnect safety plug

(Ö 9.1).

Removing battery:

● Pull out battery (1) upwards.

Installing battery:

● Insert battery (1) into battery

compartment as shown applying slight

pressure and close cover.

8.4 Charging battery

● Remove battery from battery

compartment (Ö 8.3).

● Connect charger to the mains (Ö 8.2).

● Push battery (1) into charger (2) until

first resistance is felt, then press to

stop. Green LED on battery and

charger (3) indicate that charging is

active.

● When battery is fully charged, LEDs on

battery and charger extinguish.

Remove battery from charger and insert

in battery compartment (Ö 8.3).

Charging procedure

The charger automatically exchanges data

with the battery and adapts the charging

process accordingly.

The battery is cooled during the charging

process – either actively with a fan or

passively with the natural air current in the

room, depending on the charger.

The LEDs on the battery indicate the

charging status (Ö 8.5).

When the battery is fully charged, the

charger switches off automatically and the

LEDs in the battery and charger

extinguish.

The charging time depends on various

influencing factors such as e.g. the battery

condition and ambient temperature. If a

warm battery is inserted in the charger, the

charging time may increase because the

battery must cool down before the

charging process begins.

8. Battery and charger

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viking MA 443C in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 16,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viking MA 443C Manual

Product: