667342

Viking LB 540 Manual

42
Zoom out
Zoom in
Previous page
1/502
Next page
0478 670 9903 C - EN
40
– Empty fuel tank, clean fuel line and
carburettor (@), (#)
– Clean fuel tank (@), (#)
– Clean air filter (@), (#)
– Clean spark plug (@), (#)
Fault:
Engine overheating
Possible cause:
– Oil level in engine too low
– Dirty cooling ribs
Remedy:
– Check oil level and change engine oil if
necessary (Ö 7.3)
– Clean cooling ribs (Ö 11.2)
Fault:
Excessive vibration during operation
Possible cause:
– Defective scarifying unit
– Loose engine mounting
Remedy:
– Check blades, blade shaft, spacer
bushings, fastening and bearings of
scarifying unit and repair if necessary
(Ö 11.3), (#)
– Tighten engine mounts (#)
Fault:
Poor working results
Possible cause:
– Blades set too deep (bare patches, high
grass content in scarified material)
– Blade set too shallow (little or no lawn
thatch is removed)
– Blades have reached wear limit
– V-belt defective, worn or insufficiently
tensioned
Remedy:
– Reduce working depth (Ö 7.6)
– Increase working depth (Ö 7.6)
– Replace blades (Ö 11.3), (#)
–Replace V-belt (#)
Fault:
Blades not turning freely
Possible cause:
– V-belt defective
– Scarifying unit defective
Remedy:
–Replace V-belt (#)
– Repair scarifying unit (Ö 11.3), (#)
Fault:
Scarifying unit cannot be raised or lowered
Possible cause:
– Cable defective or detached
Remedy:
– Replace or repair cable (#)
Fault:
Working depth cannot be set
Possible cause:
– Scarifying unit in operating position
– Rotary handle or adjustment element
defective
Remedy:
– Place scarifying unit in transport
position (Ö 7.5)
– Repair rotary handle or adjustment
element (#)
20.1 Handover confirmation
20.2 Service confirmation
Please hand this instruction manual
to your VIKING specialist dealer in
the case of maintenance work.
He will confirm the service operations
performed in the pre-printed boxes.
20. Service schedule
Service performed on
Next service date
15
… 42 …


Need help? Post your question in this forum.

Forumrules
1

Forum

viking-lb-540

Reset search

  • Is there a drawing showing the removal and replacement of blades on a viking LB540.1 Submitted on 28-6-2021 at 18:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking LB 540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking LB 540 in the language / languages: All languages as an attachment in your email.

The manual is 25,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info