0478 215 9921 B - EN
DE
EN
FRNLIT
ESPT
NOSV
FI
DA
HU
EL
77
Assembly
Assemble basic appliance
Mount the basic appliance 1 on the sup-
port foot 2 and use the Torx-spanner 19
to firstly lightly tighten the bolts 7.
Then mount the wheel axle 3 and the
limit stop 4 on the support foot 2 using
the bolts 5 and the nuts 6 (combination
spanner 17).
Now insert the wheels 8 and the plugs 9
on the wheel axle 13. Fix the plugs 9 by
hammering in the pins 10.
Next press both of the wheel caps 11 on
the wheels 8 and place the appliance on
an even floor.
Subsequently tighten the bolts 7.
(Torx-spanner 19)
Assemble funnel
Mount the funnel rubber seal 13 and the
funnel 14 on the tube 12 and fasten
these parts with the one-way bolts 15
using the screwdriver 16.
Mount tube
Suspend and then mount the
tube 12 on the hinge in the
basic appliance 1.
Tighten both cover bolts
simultaneously.
The tools which are required for
assembly are in the tool
compartment.
To open the tool compartment:
Press the lid down a little with
one hand.
Pull the lid off with the other hand.
Open tool compartment
1
2
1
2
1
2
1
2
Assemble locking screw
Insert locking screw 20 in slot.
Fully screw in locking screw 20
while applying pressure.
1
2
