667349
49
Zoom out
Zoom in
Previous page
1/548
Next page
47
DEFRNLITESPTNOSVFIDAPLSLSKHU EN
0478 201 9906 D - EN
Fault:
Motor does not start
Possible cause:
Motor overload protection activated
–No mains voltage
Electric cable, plug, plug connector or
switch defective
Power 2500 W
GB 2500 W
CH 2000 W
Amperage rating 11.4 A
GB 12.0 A
CH 9.3 A
Rated voltage 230 V~
Speed 2800 rpm
Fuses
1
16 A
10 A (CH)
Frequency 50 Hz
Protection class I
Type of protection Splash proof
(IP X4)
Operating conditions S6/40%
4min
Load time 6 min
Idle time
GE 150.1:
In accordance with
Directive
2000/14/EC:
Guaranteed sound
power level L
WAd
99 dB(A)
In accordance with
Directive
2006/42/EC:
Sound pressure level
at workplace L
pA
89 dB(A)
Uncertainty K
pA
2 dB(A)
Bolt tightening torques:
Blade disc 50 Nm
Reversible blade 10 Nm
Weight 26 kg
27 kg (GB)
L/W/H 95/48/114 cm
GE 150.1/GE 250.1/GE 250.1 S:
GE 250.1/GE 250.1 S:
In accordance with
Directive
2000/14/EC:
Guaranteed sound
power level L
WAd
103/100 dB(A)
In accordance with
Directive
2006/42/EC:
Sound pressure level
at workplace L
pA
92/90 dB(A)
Uncertainty K
pA
3 dB(A)
Bolt tightening torques:
Blade disc 50 Nm
Reversible blade 10 Nm
Shredding blades
2
10 Nm
Weight 28/27 kg
29/28 kg (GB)
27 kg (CH)
L/W/H 107/48/143 cm
GE 260.1/GE 260.1 S:
Motor, type BSRF 0.75/2-C
Power 2900 W
Amperage rating 4.8 A
Rated voltage 400 (3~) V~
Speed 2780 rpm
Fuses 10 A
Frequency 50 Hz
Protection class I
Type of protection Splash proof
(IP X4)
Operating conditions S6/40%
4min
Load time 6 min
Idle time
In accordance with
Directive
2000/14/EC:
Guaranteed sound
power level L
WAd
102/101 dB(A)
In accordance with
Directive
2006/42/EC:
Sound pressure level
at workplace L
pA
89/91 dB(A)
Uncertainty K
pA
3dB(A)
Bolt tightening torques:
Blade disc 50 Nm
Reversible blade 10 Nm
Shredding blades
2
10 Nm
Weight 28/27 kg
L/W/H 107/48/143 cm
1) Caution:
In the case of mains fuses of less
than 16 A, these may be tripped dur-
ing start-up or in the case of high
load operation of the machine.
2) for models GE 250.1 and GE 260.1
19. Troubleshooting
# If necessary, contact a specialist
dealer; VIKING recommends VIKING
specialist dealers.
GE 260.1/GE 260.1 S:
49


Need help? Post your question in this forum.

Forumrules
1

Forum

viking-ge-150

Reset search

  • Where is the rest locking device on a Viking GE150 shredder please?
    Submitted on 2-4-2022 at 11:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking GE 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking GE 150 in the language / languages: All languages as an attachment in your email.

The manual is 18,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info