612617
6
Zoom out
Zoom in
Previous page
1/56
Next page
iv
Important Safety Instructions
Dangerous Voltage: The lightning ash with
arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence
of dangerous voltage within the inside of the
product that may be sufcient level to constitute
a risk of electric shock to persons.
Instruction: The exclamation point within
an equilateral triangle is intended to alert the
user to the presence of important operating
and servicing instructions in the literature
accompanying the appliance.
1. Read these instructions completely before using the
equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean with a soft, dry cloth.
7. Do not block any ventilation openings. Install the
equipment in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
devices (including ampliers) that produce
heat.
9. Do not attempt to circumvent the safety
provisions of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third
grounding prong. The wide blade and the third prong are
provided for your safety. If the provided plug does not t
into your outlet, consult an electrician for replacement of
the outlet.
10. Prevent the power cord from being tread upon or
pinched, particularly at the plug, convenience
receptacles, and the point where they exit from the
device. Be sure that the power outlet is located near the
equipment so that it is easily accessible.
11. Only use attachments/ accessories specied
by the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specied by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus when it will be unused for a long
period of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, or the unit does not operate normally, or
has been dropped.
USE
AC power Cord
Keep the following guidelines to protect the AC power cord
from being damaged. If the AC power cord is damaged, it
may result in a re or an electric shock. Stop using it and ask
your dealer or ViewSonic service center to exchange it.
Do not place the TV where the power cord is subject to
wear or abuse.
Do not pinch, bend, or twist the cord excessively.
The core lines may be bared and cut, causing a short-
circuit, and resulting in a re or an electric shock.
Do not convert or damage the power
cord.
Avoid power cord being rolled over or
rested upon.
When the power cord is plugged in, do
not move the TV.
Keep the power cord away from heat sources.
When you disconnect the AC power cord, disconnect it
from the wall outlet rst.
When disconnecting the power cord, grasp the plug instead
of pulling the power cord.
Use only an original ViewSonic AC power cord, not other
brands.
Do not use the supplied AC power cord on any other
equipment.
Wall outlet
Insert the plug fully into the outlet. If it is loose,
do not use it. Doing so may cause arcing and
result in a re. Contact your electrician to
change the outlet.
Wiring
For your safety, be sure to unplug the AC
power cord when connecting cables.
Take care not to trip on the cables. It may cause damage to
the TV set.
Electric shock
Do not touch the AC power cord or the TV with
a wet hand. If you plug/unplug the AC power
cord from the TV with a wet hand, it may
cause electric shock.
Lightning storms
During a lightning storm, unplug the TV from the wall outlet
and disconnect the antenna to prevent damage to the TV.
When not in use
If you will not be using the TV set for long periods of time,
the TV set should be disconnected from the AC power outlet
to prevent power line surges. The TV set is not disconnected
from the AC power source when the TV set is switched off.
To disconnect the TV set completely, unplug from the AC
power outlet.
Overloading
This TV set is designed to operate on a 120V
AC supply only.
If there are too many appliances connected to
the same AC power outlet, it could result in a
re or an electric shock.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viewsonic VT2756-L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viewsonic VT2756-L in the language / languages: English as an attachment in your email.

The manual is 4,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info