537990
14
Zoom out
Zoom in
Previous page
1/90
Next page
9
Remote control code
The projector can be assigned to two different remote control codes, A or B. When several
adjacent projectors are in operation at the same time, switching the remote control codes
can prevent interference from other remote controls. Set the remote control code for the
projector first before changing that for the remote control.
To switch the code for the projector, select A or B in the SYSTEM SETTING:
ADVANCED > Remote Control Code menu.
To switch the code for the remote control, press PgUp and PgDn buttons on the remote
control together for 5 seconds or more. The initial code is set to A.
If different codes are set on the projector and remote control, there will be no response from
the remote control. When that happens, switch the code for the remote control again.
12. Magnify
Displays the zoom bar that magnifies or
reduces the projected picture size.
13. Lock
Activates or deactivates panel key lock.
14. Freeze
Freezes the projected image.
15. Pattern
Displays embedded test pattern.
16. Blank
Hides the screen picture.
17. DynamicEco
Decreases the power consumption of the
lamp by up to 30%.
• It takes some time to initiate this
function. Make sure the projector has
been turned on for more than 4 minutes.
If the projector is resumed by using the
Smart Restart feature, this function can
be executed immediately.
• After 30 minutes of continuous use in
D.Eco mode, the projector will revert to
Normal mode for 5 minutes before
switching back to D.Eco mode.
18. Auto Sync
Automatically determines the best picture
timings for the displayed image.
19. Color Mode
Selects an available picture setup mode.
20. Exit
Goes back to previous OSD menu, exits
and saves menu settings.
21. PgUp (Page Up)/PgDn (Page Down)
Operates your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint) when the mouse mode is
activated.
22. Volume keys (+, -)
Magnifies or reduces the volume level.
23.
Toggles the projector audio between on
and off.
24. Aspect
Selects the display aspect ratio.
25. Timer
Displays the presentation timer settings
menu.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viewsonic PJD6543w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viewsonic PJD6543w in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viewsonic PJD6543w

Viewsonic PJD6543w User Manual - French - 88 pages

Viewsonic PJD6543w User Manual - Portuguese - 87 pages

Viewsonic PJD6543w User Manual - Spanish - 91 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info