596693
43
Zoom out
Zoom in
Previous page
1/81
Next page
38
2. Press to highlight 3D Settings and press MODE/ENTER on the projector or
Enter on the remote control.
3. Press to highlight 3D Sync and press MODE/ENTER on the projector or Enter
on the remote control.
4. Press to select a 3D Sync setting according to the table below and then press
MODE/ENTER on the projector or Enter on the remote control to confirm.
For example, if the signal is input from the projector’s S-Video input socket, and its signal
type (resolution) is 480i, then the default 3D Sync setting of the projector is Off, and the
options you can choose for the 3D Sync setting are Off and Frame Sequential.
When the 3D Sync function is on:
The brightness level of the projected image will decrease.
The Color Mode cannot be adjusted.
The Keystone can only be adjusted within limited degrees.
The Zoom can only magnify the pictures to limited sizes.
If you discover the inversion of the 3D image depth, set the 3D Sync Invert function to “Invert”
to correct the problem.
Using the projector in standby mode
Some of the projector functions are available in standby mode (plugged in but not turned
on). To use these functions, be sure you have turned on the corresponding menus under
SYSTEM SETTING: BASIC > Standby Settings, and the cable connections are correctly
made. For the connection methods, see the Connection chapter.
Power Saving
Less than 0.5W power consumption when Power Saving mode is turned on.
Active VGA Out
Selecting On outputs a VGA signal when the COMPUTER IN 1 and COMPUTER OUT
sockets are correctly connected to devices. The projector outputs the signal received only
from COMPUTER IN 1.
Input signal type (resolution) Default setting 3D Sync options available
HDMI (PC) and DVI-D 120Hz
signals (SVGA 120Hz, XGA 120Hz,
WXGA 120Hz, 1280x720 120Hz)
Frame Sequential Off, Frame Sequential
HDMI (PC) and DVI-D 60Hz signals
(up to 1920x1200 60Hz)
Off
Off, Frame Sequential,
Frame Packing, Top-
Bottom, Side-by-Side
Video, S-Video signals (HQFs) and
Component video, HDMI signals
(NTSC 480i)
Off Off, Frame Sequential
Component video, HDMI signals
(480p, 720p, 1080p, 1080i) without
3D information frame
120Hz: Off
60Hz: Off
120Hz:Off, Frame
Sequential
60Hz: Off, Frame
Sequential, Frame Packing,
Top-Bottom, Side-by-Side
HDMI 1.4a signals (720p, 1080i,
1080p) with 3D information frame
Auto
Auto, Off, Frame
Sequential, Frame Packing,
Top-Bottom, Side-by-Side
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viewsonic PJD5533w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viewsonic PJD5533w in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viewsonic PJD5533w

Viewsonic PJD5533w User Manual - German - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info