594799
13
Zoom out
Zoom in
Previous page
1/17
Next page
GB GB
Retro DAB+ Operation Guide
25
Retro DAB+ Operation Guide
24
Alarm Sounds
- If the alarm is set to DAB/DAB+ mode and no DAB/DAB+ stations can be received, BEEP Tone1
will sound.
- If the alarm is set to “iPod” mode and there is no iPod connected, BEEP Tone1 will sound.
- Whether “iPod” or “BEEPER” alarms are sounding, docking or removing an iPod or iPhone will
turn off the alarm.
- If two alarms are set, when ALARM 1 is sounding and ALARM 2 begins to sound, it will
automatically turn off ALARM 2.
Alarm Volume
Whichever alarm mode is selected, the alarm volume will be half the maximum volume.
Sleep Timer
You can send your Retro DAB+ to sleep for up to 90 minutes time.
In working mode, press and hold SNOOZE (9) to enter sleep function setting. The display will show ‘Sleep
Timer‘ with “OFF” ashing on the lower right. Press (4) or (6) to select sleep time from 15min,
30min, 45min, 60min or 90min. Press (5) to conrm your selection.
Sleep time will be displayed as ‘Snn’ on the upper right of the screen, where ‘nn’ is the sleep time selected.
To cancel the sleep timer, follow instructions above and select ‘off’ instead of a sleep time.
Other Operations
Your Retro DAB+ has two functions that you are only likely to need in the unlikely event of a problem while
in conversation with support.
Factory Reset
[Note] Factory Reset will cancel all your presets
In working mode, press and hold “MODE” button until “Press Enter Key to Reset” is displayed.
Then press (5) to conrm. “System Reset, then System Reset OK” will display.
Software Version
In working mode, press and hold INFO to check the software version.
5. Set alarm time hours by pressing (4) or (6). Press (5) to conrm hours setting and go on to
minutes.
6. Set alarm time minutes by pressing (4) or (6). Press (5) to conrm hours setting and go on
to alarm type.
7. Set alarm type by pressing (4) or (6). Sources are:
- BEEP Tone 1
- BEEP Tone 2
- DAB
- FM
- iPod
8. Press (5) to conrm alarm type setting.
9. In Standby mode your Retro DAB+ will show bell symbols and numbers to show which alarms are active.
To show alarm status
In either standby or working modes press SNOOZE( 9) to select ALARM 1. Press it again to select ALARM
2. In either case the status of the alarm will be displayed:
Stopping or snoozing the alarm
When alarm goes off you can press (1) to turn off the alarm
Press SNOOZE (9) to snooze for 5 minutes. Your Retro DAB+ will enter into Standby mode and show the
clock. You can repeat snoozing for a maximum period of 1 hour.
Snoozing multiple alarms
Only one alarm can be snoozing at a time. If ALARM 1 is snoozing ALARM 2 will also automatically snooze if
it begins to sound. ALARM 1 snooze will be cancelled.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for View Quest Retro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of View Quest Retro in the language / languages: English as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of View Quest Retro

View Quest Retro User Manual - German - 14 pages

View Quest Retro User Manual - Dutch - 14 pages

View Quest Retro User Manual - French - 14 pages

View Quest Retro User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info