594800
11
Zoom out
Zoom in
Previous page
1/19
Next page
GB GB
Retro Mini Operation Guide
21
Retro Mini Operation Guide
20
The Specic Functions of Your Retro Mini
DAB/DAB+
1. For best reception, make sure the aerial is fully extended vertically.
2. To switch to DAB/DAB+, press MODE button repeatedly until the display shows DAB.
a. First time use, or after Factory Reset : Your Retro Mini will automatically begin to quick scan for DAB/
DAB+ stations. A progress bar will show the progress of the scan, and multiplex information is shown.
Stations found will be automatically stored. The number of stations found will also be displayed at the
upper right corner of the display. The rst station available will be shown on the display and played
automatically.
If no DAB/DAB+ signal is detected, “No Signal” will be displayed.
b. Subsequent use: Your last selected station will be displayed, tuned and played if possible.
The display will show the Station Name on the top line of 2X16 matrix, and the Programme Type, if available,
on the second line.
3. Press the Left and Right button to browse the stations.
Press Centre button to conrm the stations you want to
listen to.
4. To full scan or manually tune for stations
If you want to perform full scan or manual scan for your desired stations, press MENU button to select Full Scan
or Manual Scan. Using Left and Right button to select and conrm by the Centre button.
5. Press Play/Pause button if you want to mute the DAB radio.
6. Press INFO button, the scrolling information of the station will be displayed according to the following
sequence DYNAMIC LABEL SEGMENT (DLS), PROGRAM TYPE, ENSEMBLE NAME, SIGNAL
STRENGTH, CURRENT TIME, ENSEMBLE FREQ, TRANSFER RATE. The information type you select
will then be displayed for the current DAB/DAB+ station.
2GB>
11D 222.064MHz
Turn On, Tune In and Enjoy Retro Mini Sound & Style
Positioning
A good place for your Retro Mini:
- has a at and stable surface with sufcient ventilation
- is within 1.4metres of a power socket if you are using mains power.
- has space above it for you to fully extend the telescopic aerial vertically.
- is away from bright sunlight, heat sources, humidity and dampness.
Preparing
- If using mains power: connect the mains power lead into the socket on the back of the radio (DC IN).
Switch the mains power wall socket off. Now plug the power adaptor into the wall socket, and switch the wall
socket on.
- If not using mains power, ensure new batteries are correctly tted. Your Retro Mini can be powered by four type
AA’ alkaline or rechargeable batteries (not supplied). When using batteries to power the unit, function and
operation are the same as using the mains, except that in standby mode, the LCD will shut down and can not
charge out for any device .
If operating on batteries, please switch of the mains adaptor and remove the mains power plug from the back of
the radio.
- Fully extend the radio aerial vertically for the best reception.
Switching on
- When switching on the unit, press and hold the Centre button.
What you will see when you switch on:
- “View Quest” will be displayed for 2 seconds, followed by the clock. This is ‘standby’ mode.
- After 10 seconds the display backlight will switch off.
Leaving and entering standby mode
- Press and hold Centre button to switch between working and standby mode. In standby mode the
display shows a clock and date, in working mode the display shows information about the current
function.
11


Need help? Post your question in this forum.

Forumrules
1

Forum

view-quest-retro-mini

Reset search

  • Vq retro mini is stuck on standby. No buttons working
    Submitted on 1-12-2021 at 16:00

    Reply Report abuse
  • How do I increase the backlight on my Retro Mini radio? I have pressed the menu button but nothing seems to happen. Submitted on 1-10-2021 at 20:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for View Quest Retro Mini at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of View Quest Retro Mini in the language / languages: English as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of View Quest Retro Mini

View Quest Retro Mini User Manual - German - 16 pages

View Quest Retro Mini User Manual - Dutch - 16 pages

View Quest Retro Mini User Manual - French - 16 pages

View Quest Retro Mini User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info