30792
38
Zoom out
Zoom in
Previous page
1/47
Next page
37
submenus, the sub items for AUDIO are displayed as shown in the figure below.
1 DIGITAL OUT
DIGITAL OUT item controls the output condition of digital out (coaxial or optical) connector. There
are 3 values possible for DIGITAL OUT. They are OFF, BITSTREAM and PCM. In the case of
OFF value, No digital signal can be output. Only analog audio can be output. In the case of
BITSTREAM value, the original audio stream recorded on the disc is output through the digital out
connector. In the case of PCM value, the decoded audio stream will be output through the digital
out connector. The relation of amplifier and DIGITAL OUT option is shown below.
Amplifier available
Possible DIGITAL OUT values
No Amplifier OFF
Digital Decoder Amplifier (Dolby Digital, dts) OFF, BITSTREAM, PCM (Valid for Dolby Digital)
Stereo or Dolby Prologic Amplifier
OFF, PCM (Valid for Dolby Digital not dts)
2 DOWNMIX (Dolby Digital DVD disc only)
DOWNMIX is used to reproduce the proper analog audio when the audio channel recorded on the
disc differs from the output audio channel configuration. Assume that 5.1 channels audio are
recorded on the disc but you can receive only stereo audio channels. In this case downmix is
unavoidable and you will hear all the channels recorded on disc. There are two ways of
downmixing. One is LT/RT and the other is LO/RO. If you are using Dolby Surround Pro Logic
decoder, please set the downmix mode to LT/RT otherwise LO/RO.
3 DUAL MONOs (Valid for Dolby Digital DVD disc)
DUAL MONOs are two independent mono channels defined in Dolby Digital. DUAL MONO programs
are mainly used for different language versions in one program. This functions in a similar fashion
to TV or VCR supporting secondary audio program. From two MONO channels, STEREO, LEFT
MONO, RIGHT MONO and MIXED MONO may be output in 4 different combinations.
STEREO L channel on L speaker, R channel on R speaker
LEFT MONO L channel on L and R speaker
RIGHT MONO R channel on L and R speaker
MIXED MONO Mix two mono and output mixed mono on both (L, R) speaker
4 DYNAMIC RNG (Valid for Dolby Digital DVD disc)
A consistent problem in the delivery of audio programming is that different members of the audience
desire or even need different amounts of dynamic range depending on the listening situation.
Original high quality programs, such as feature films, are typically mixed with a wide dynamic
range. Using dialogue as a reference, loud sounds like explosions are often 20 dB louder, and
faint sounds like leaves rustling may be 50 dB quieter. In many listening situations, it is
objectionable to allow the sound to become very loud, and the loudest sounds must be
compressed downwards in level. Likewise the very quiet sounds would be inaudible and must be
brought upwards in level to be heard. If you want to hear the original dynamic range recorded on
disc set the DYNAMIC RNG to 0. Otherwise set to 8 then the dynamic range is reduced by
bringing down the level of the loud sounds and bringing up the level of the quiet sounds.
7.2 Video
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vieta DVD2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vieta DVD2 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vieta DVD2

Vieta DVD2 User Manual - Spanish - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info