813831
29
Zoom out
Zoom in
Previous page
1/72
Next page
29
Setting a time program
Factory setting: One time phase from 06:00 to 22:00
for every day of the week
Tap the following on-screen buttons:
1. If applicable, for the "Heating circuit" default
display
2. If applicable, in the menu bar for the relevant
heating circuit
3.
4. Required day of the week
5.
6. Depending on the required change:
to change the time phase
for a new time phase
to delete a time phase
to select the time phase if more than one
time phase is set.
Note
When adjusting the setting, bear in mind that your sys-
tem requires some time to heat the rooms to the
required temperature.
To continue: See page 20.
Setting the "Heating curve"
By setting the "Heating curve", you influence the flow
temperature provided by the heat generator.
To ensure your rooms are heated optimally at any out-
side temperature, you can adjust the "Level" and
"Slope" of the "Heating curve".
Factory settings:
"Slope": 1.4
"Level": 0
Tap the following on-screen buttons:
1.
2. "Heating"
3. Required heating circuit, e.g. "Heating circuit
1"
4. "Heating curve"
5. for the required value for "Slope" and
"Level" respectively
The graph displayed clearly shows the change in
the "Heating curve" as soon as you alter the
value for the "Slope" or "Level".
6. to confirm
Tips for setting the "Heating curve"
Room temperature behaviour Remedy
The home is too cold during the winter. Set the "Slope" to the next level up.
The home is too warm during the winter. Set the "Slope" to the next level down.
The home is too cold during the spring/autumn and win-
ter.
Set the "Level" to a higher value.
The home is too warm during the spring/autumn and
winter.
Set the "Level" to a lower value.
The home is too cold during the spring/autumn but
warm enough during the winter.
Set the "Slope" to the next level down and "Level" to
a higher value.
The home is too warm during the spring/autumn but
warm enough during the winter.
Set the "Slope" to the next level up and "Level" to a
lower value.
Central heating
Time program for central heating
6194132
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann Vitovalor PT2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann Vitovalor PT2 in the language / languages: English as an attachment in your email.

The manual is 2.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann Vitovalor PT2

Viessmann Vitovalor PT2 User Manual - German - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info