813830
28
Zoom out
Zoom in
Previous page
1/44
Next page
28
Unintentional interruption of external power supply
If the system is disconnected from the external power
supply due to an external fault (power failure, trigger-
ing of a safety device), power generation by the fuel
cell module is interrupted.
If a fault message is displayed after the power supply
has been interrupted, please notify your heating con-
tractor.
When the external power supply is reinstated once the
fault has been rectified, power generation resumes
automatically.
1. Turn off power generation by the fuel cell module:
See page 27.
2. Check the operating status of the fuel cell module.
For this, call up the "Fuel cell" menu in
"Information".
Before interrupting the power supply, ensure the
fuel cell module is in the "No power and heat
generation" operating status.
Note
It takes approx. 1 to 2 hours for the shutdown
phase of the fuel cell module to reach the "No
power and heat generation" operating status.
3. Turn off both ON/OFF switches D and E on the
programming unit: See page 28.
4. Close the gas shut-off valve.
!Please note
If outside temperatures of below 3 °C are
expected, take appropriate measures to pro-
tect the system from frost.
If this is the case, please contact your heat-
ing contractor.
5. Switch OFF the external power supply.
Note
As they are not being supplied with power, the circu-
lation pumps and diverter valves may seize up.
If your system has been shut down for a prolonged
period, you may have to reset the "Time" and
"Date": See page 19.
Switching on the system
B
C
D
E
A
Fig. 4
AGas shut-off valve
BHandle
CFront panel
Start-up/shutdown
Switching off the system (cont.)
6194128
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann Vitovalor PA2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann Vitovalor PA2 in the language / languages: English as an attachment in your email.

The manual is 2.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann Vitovalor PA2

Viessmann Vitovalor PA2 User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info