813830
20
Zoom out
Zoom in
Previous page
1/44
Next page
20
You can adjust the display brightness for operation and
for standby separately.
Tap the following buttons:
1.
2. "Settings"
3. "Display setting"
4. "Brightness, operation"
Or
"Brightness, standby"
5. for the required value
6. to confirm
Switching the Lightguide on and off
Depending on the type of heat generator, a red illumi-
nated strip (Lightguide) is displayed at the lower or
upper edge of the control unit during operation.
In the delivered condition, the Lightguide is switched
on. You can switch off the Lightguide.
Meaning of the display:
Lightguide pulsates slowly:
Display is in standby mode.
Lightguide is illuminated constantly:
You are operating the control unit. Every input opera-
tion is confirmed by a brief flashing.
Lightguide flashes quickly:
There is a fault on the system.
Tap the following on-screen buttons:
1.
2. "Settings"
3. "Display setting"
4. "Lightguide ON/OFF"
5. "ON"
Or
"OFF"
6. to confirm
Note
Faults are shown by flashing lights even if the Light-
guide is switched off.
Setting the "Time" and "Date"
The "Time" and "Date" are set at the factory. If your
system has been shut down for a prolonged period,
you may need to reset the "Time" and "Date".
Tap the following buttons:
1.
2. "Settings"
3. "Date and time"
4. "Date"
Or
"Time"
5. for the required value
6. to confirm
Automatic "Summer/wintertime" changeover
The automatic changeover from summer/wintertime is
factory-set.
In this menu you can switch the changeover from sum-
mer/wintertime on and off.
Tap the following buttons:
1.
2. "Settings"
3. "Date and time"
4. "Time changeover"
5. for "ON" or "OFF"
6. to confirm
Further adjustments
Setting the display brightness
6194128
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann Vitovalor PA2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann Vitovalor PA2 in the language / languages: English as an attachment in your email.

The manual is 2.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann Vitovalor PA2

Viessmann Vitovalor PA2 User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info