Manual Viessmann VITOTRONIC 200 (page 95 of 112) (English)

813781

Zoom out

Zoom in

1/112

Heating water buffer cylinder

A heating water buffer cylinder stores thermal energy

for central heating. All heating/cooling circuits are sup-

plied from this buffer cylinder.

Central cooling is possible only over one cooling cir-

cuit. A hydraulic bypass circuit prevents coolant from

entering the heating water buffer cylinder.

For further information on buffer cylinders, see "Buffer

cylinders".

Cascade

See "Heat pump cascade".

Controlled mechanical ventilation

A mechanical ventilation system provides continuous

ventilation of your interior.

The mechanical ventilation system comprises a venti-

lation unit, the ductwork, as well as supply air and

extract air vents.

An outdoor air filter installed in the ventilation unit pro-

tects against the ingress of pollen.

If a Viessmann ventilation unit is connected to the heat

pump control unit, all ventilation functions can be set at

the heat pump control unit.

Operating principle of the ventilation unit

Fig. 68 Example: Vitovent 300-F

ASupply air: e.g. for bedrooms, children's rooms, liv-

ing room

BExhaust air

COutdoor air

DExtract air: e.g. from the kitchen, bathroom, WC

EBypass not active:

Ventilation with heat recovery

FBypass active: ventilation without heat recovery,

e.g. for passive heating or cooling

Ventilation with heat recovery, bypass blocked

The air that is introduced into the rooms (supply air) is

preheated with the heat from the extracted air (extract

air) via a heat exchanger in the ventilation unit. For

this, bypass E is not active.

This means the energy loss is very low, compared to

airing via open windows.

Ventilation without heat recovery, bypass active

When bypass F is active, 100 % of the extract air

flow is routed past the heat exchanger, and filtered

fresh outdoor air at outside temperature is introduced

into the rooms.

Depending on the outside temperature and room tem-

perature, when the bypass is active, cooler or warmer

outdoor air is channelled into the rooms. This means

the rooms are passively cooled or passively heated.

Passive cooling

Cooler outdoor air is supplied to the rooms on cool

summer nights, for example.

The bypass is active for passive cooling if all of the fol-

lowing conditions are met:

Vitovent 200-C:

■It is at least 4 °C warmer inside than outside.

■The room temperature is at least 1 °C higher than

the "Set room temperature" for ventilation.

■The outdoor air is at least 0.5 °C warmer than the

"Min supply air t. byp".

Vitovent 300-F:

■It is at least 4 °C warmer inside than outside.

■The room temperature is at least 1 °C higher than

the "Set room temperature" for ventilation.

■The supply air exceeds the minimum temperature for

passive cooling ("Min supply air t. byp").

Appendix

Terminology (cont.)

5817913

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann VITOTRONIC 200 in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann VITOTRONIC 200

Viessmann VITOTRONIC 200 User Manual - German - 112 pages

Viessmann VITOTRONIC 200 User Manual - Dutch - 112 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viessmann VITOTRONIC 200 Manual

Product: