813781
66
Zoom out
Zoom in
Previous page
1/112
Next page
66
Brine/water or water/water heat pumps
You can clean the appliance surfaces with a commer-
cially available domestic cleaning agent. Never use
scouring agents.
Air/water heat pumps
!Please note
Commercially available domestic cleaning
agents and special cleaning agents for the heat
exchanger (evaporator) can damage the heat
pump.
Clean the appliance surfaces only with a damp
cloth.
If necessary, clean the heat exchanger fins
(evaporator) only with a dustpan brush with
long bristles.
Air/water heat pumps with a plastic surface
!Please note
Commercially available cleaning agents can
damage the surface of the external casing.
Use only mild water-based domestic cleaning
agents.
Do not use substances containing acids or
solvents, such as vinegar-based cleaners,
nitro or synthetic resin solutions, nail varnish
remover, ethyl alcohol, etc.
!Please note
Mechanical influence will scratch the surface of
the external casing.
Only wipe the surface with a soft damp cloth.
Do not use substances that contain abrasive
particles such as polishes, scouring agents,
dirt erasers or scouring pads.
Do not clean the external casing with a pres-
sure washer.
Programming unit of the heat pump control unit
Clean the surface of the programming unit with the
microfibre cloth provided.
Heating system inspection and maintenance
The inspection and maintenance of a heating system
is prescribed by the Energy Saving Ordinance [EnEV -
Germany] and the DIN 4755, DIN 1988-8 and EN 806
standards.
Regular maintenance ensures trouble-free, energy effi-
cient and environmentally responsible heating and
cooling operation. For this, it is best to arrange an
inspection and maintenance contract with your local
contractor.
DHW cylinder (if installed)
Standards DIN 1988-8 and EN 806 specify that main-
tenance and cleaning should be carried out no later
than 2 years after commissioning and as required
thereafter.
Only a qualified heating contractor should clean the
inside of a DHW cylinder and the DHW connections.
If any water treatment equipment (e.g. a sluice or
injection system) is installed in the cold water supply of
the DHW cylinder, ensure this is refilled in good time.
In this connection, observe the manufacturer's instruc-
tions.
In addition for Vitocell 100:
We recommend that the correct function of the sacrifi-
cial anode is checked annually by your heating con-
tractor.
Maintenance
Cleaning the heating system
5817913
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann VITOTRONIC 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann VITOTRONIC 200 in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann VITOTRONIC 200

Viessmann VITOTRONIC 200 User Manual - German - 112 pages

Viessmann VITOTRONIC 200 User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info