813781
61
Zoom out
Zoom in
Previous page
1/112
Next page
61
With frost protection monitoring
For every heating/cooling circuit, select the operating
program "Standby mode".
For the preferred heating/cooling circuit
1. Standard menu:
/ for the operating program "Standby mode"
(frost protection)
2. OK to confirm
For all heating/cooling circuits
1. Extended menu:
2. "Heating" or "Heating/cooling"
3. If applicable, use / to select the required heating/
cooling circuit
4. "Operating program"
5. "Standby mode" (frost protection)
The circulation pumps are briefly started every
24 hours to prevent them from seizing up.
If a ventilation unit is connected to your heat pump
control unit, the ventilation unit continues to run in
the selected operating program (e.g. "Ventilation
program").
Note
In the following cases, frost protection is only guaran-
teed with a booster heater (on site):
Air/water heat pumps:
At temperatures below 15 °C
When there is a heat pump fault
Auxiliary heaters may include instantaneous heating
water heaters (electric booster heaters) or oil/gas boil-
ers (fossil fuel booster heaters).
Without frost protection monitoring (shutting down the system)
1. Switch the ON/OFF switch OFF.
2. Isolate the system from the power supply, e.g. at a
separate MCB/fuse or a mains isolator.
!Please note
If outside temperatures below 3 °C are
expected, take appropriate measures to pro-
tect the heat pump and the heating system
from frost.
If necessary, contact your contractor.
Note
If a ventilation unit is connected to your heat pump
control unit, this ventilation unit runs with the minimum
air flow rate (
1
).
Information on shutting down for longer periods
Circulation pumps may seize up when they are not
supplied with power.
It may be necessary to reset the date and time: see
chapter "Setting the time and date".
Starting the heat pump
1. Switch ON the power supply, e.g. at a separate
MCB/fuse or a mains isolator.
2. Switch ON/OFF switch ON.
After a short time, the standard menu is displayed:
See page 17.
The green ON indicator illuminates. Your heat
pump and remote control units (if available) are
now ready for operation.
Switching on and off
Shutting down the heat pump
5817913
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann VITOTRONIC 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann VITOTRONIC 200 in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann VITOTRONIC 200

Viessmann VITOTRONIC 200 User Manual - German - 112 pages

Viessmann VITOTRONIC 200 User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info