813781
26
Zoom out
Zoom in
Previous page
1/112
Next page
26
The standard room temperature is the temperature at
which you feel comfortable. Your home is always
heated or cooled to this temperature when a time
phase with the operating status "Standard" is active in
the time program.
Setting the time program for central heating/central
cooling: See page 27.
Factory setting: 20 °C
For the preferred heating/cooling circuit
1. Standard menu:
/ for the required value
2. OK to confirm
For all heating/cooling circuits
1. Extended menu:
2. "Heating" or "Heating/cooling"
3. If applicable, use / to select the required heating/
cooling circuit
4. "Set room temperature"
5. Set the required value.
Information for operation with a ventilation unit
Set the room temperature for ventilation approx. 2 °C
higher than the standard room temperature for central
heating/central cooling: See page 43.
This setting will ensure that the bypass functions cor-
rectly.
Setting the reduced room temperature for central heating
You can set the room temperature for those time peri-
ods during which you require less heat.
This room temperature applies to the following time
periods:
In the time phases for which you set the operating
status to "Reduced" in the "Time program": See
page 27
In the holiday program: See page 33.
Factory setting: 16 °C
Note
No set reduced room temperature can be set for a
separate cooling circuit.
1. Extended menu:
2. "Heating" or "Heating/cooling"
3. If applicable, use / to select the required heating/
cooling circuit
4. "Set red. room temp"
5. Set the required value.
Setting the operating program for central heating/central cooling
In the "Operating program" for central heating you
set whether the central heating is enabled or not.
For an overview of the operating programs, see
page 21.
For the preferred heating/cooling circuit
Standard menu:
1. / for the operating program:
E.g. "Heating and DHW"
2. OK to confirm
For all heating/cooling circuits
Extended menu:
1.
2. "Heating" or "Heating/cooling"
3. If applicable, use / to select the required heating/
cooling circuit
4. "Operating program"
5. Select the required operating program, e.g. "Heat-
ing and DHW"
Central heating/central cooling
Setting the standard room temperature for central heating/central cooling
5817913
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann VITOTRONIC 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann VITOTRONIC 200 in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann VITOTRONIC 200

Viessmann VITOTRONIC 200 User Manual - German - 112 pages

Viessmann VITOTRONIC 200 User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info