813781
17
Zoom out
Zoom in
Previous page
1/112
Next page
17
2
Reduced air flow rate
3
Standard air flow rate
4
Maximum air flow rate
2
Frost protection for the ventilation unit is active.
Symbol using ventilation level 2 as an example
2
Preheating coil for the ventilation unit, if installed,
is switched on. Symbol using ventilation level 2
as an example
The ventilation unit has been switched off at the
system ON/OFF switch.
or
The power supply plug has been pulled out.
Messages: See page 56.
Fault
Warning
Note
Standard menu: Displays and settings
In the standard menu, you can make and check the
following settings for the preferred heating/cooling cir-
cuit E:
Standard room temperature (your individual prefer-
red temperature)
Operating program
Call up the standard menu as follows:
Screensaver is active; see page 19:
Press OK.
If you are in the extended menu, see page 18:
Press repeatedly until the standard menu
appears.
40°C
Flow temperature
14°C 21°C
HC1
E
Screed drying
B
C
A
D
Fig. 5
AOperating program for the preferred heating/cool-
ing circuit (E)
BCurrent outside temperature
CSet room temperature for the preferred heating/
cooling circuit (E)
DInformation bars
EPreferred heating/cooling circuit: See page 51.
Not shown if only one heating/cooling circuit is
installed.
Note
In the case of special system versions, the standard
menu may differ from the display shown here: See
chapter "Special system versions" on page 59.
The settings for the preferred heating/cooling circuit
can also be adjusted in the extended menu: See
page 18.
The settings for any other connected heating/cooling
circuits can only be adjusted in the extended menu.
The settings for ventilation (if installed) can only be
adjusted in the extended menu.
Your contractor can block operation for the standard
menu. In such cases, you will not be able to make
adjustments in either the standard menu or the
extended menu. "Controls locked out" is dis-
played.
Information bars D
The upper information bar displays special operating
programs: See page 22.
"Screed drying"
"External hook-up"
"External program"
Operating the heat pump control unit
Operating the heat pump control unit (cont.)
5817913
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann VITOTRONIC 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann VITOTRONIC 200 in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann VITOTRONIC 200

Viessmann VITOTRONIC 200 User Manual - German - 112 pages

Viessmann VITOTRONIC 200 User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info