Manual Viessmann Vitotronic 200 - WO1C (page 23 of 112) (English)

813833

Zoom out

Zoom in

1/112

External hook-up

■Your contractor has connected external switching

contacts to your heat pump control unit and set their

functions. With these switching contacts, the heat

pump or particular system components such as a

mixer can be switched on or off.

■Your contractor has integrated the heat pump into a

building management system. This system switches

particular functions, system components or operating

programs on or off, regardless of your settings.

Note

While "External hook-up" is active, you cannot

change the set operating program on the heat pump

control unit. Once "External hook-up" has ended, the

heat pump control unit continues using the previously

set operating program.

External program

Your contractor has connected the heat pump control

unit to the internet, e.g. via the Vitoconnect internet

interface.

The operating program and other functions are

switched on or off via a Viessmann app.

Note

While "External program" is active, you can change

the set operating program on the heat pump control

unit after responding to a prompt. Once "External

program" has ended, the heat pump control unit con-

tinues using the previously set operating program.

Holiday program

See page 33.

Procedure for setting a time program

The following explains how to enter the settings for a

time program. The specifics of the individual time pro-

grams can be found in the relevant chapters.

You can set up a time program for the following func-

tions:

■Central heating/central cooling: See page 27.

■Heating a buffer cylinder: See page 28.

■Cooling a buffer cylinder: See page 29.

■DHW heating: See page 35.

■DHW circulation pump: See page 37.

■Electric booster heater: See page 39.

■Quieter operation of air/water heat pumps: See

page 41.

■Mechanical ventilation (in conjunction with ventilation

unit): See page 44.

The time program allows you to divide the day into

sections. These are called time phases. It is for you to

decide what happens in these time phases, e.g.

whether your rooms should be heated to the standard

room temperature. For this, set an operating status

for each time phase.

The available operating statuses differ, e.g. through

different temperature levels.

■You can set the time program individually, to be the

same, or different, for every day of the week.

■You can select up to 8 time phases per day.

■The time phases are numbered.

■For each time phase you set the start and end

points.

The selected time phase is illustrated by a white bar

on the time chart. The length of the bar reflects the

length of time.

■The individual operating status is indicated on the

time chart by bars of different heights.

Where several time phases overlap, the operating

status with the highest bar takes priority.

■In the extended menu, you can call up the time pro-

grams under "Information": See page 53.

Setting a time program using central heating/central cooling as an example

1. Extended menu:

2. "Heating/cooling"

3. If applicable, use / to select the required heating/

cooling circuit.

4. "Time proghtg/cooling"

5. Select part of the week or a day.

6. Select a time phase ! to (. The selected time

phase is illustrated by a white bar on the time

chart.

7. Set the start and end points for the relevant time

phase. The length of the white bar on the time

chart is adjusted accordingly.

Operating the heat pump control unit

Operating program information (cont.)

5817913

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann Vitotronic 200 - WO1C in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann Vitotronic 200 - WO1C

Viessmann Vitotronic 200 - WO1C User Manual - German - 112 pages

Viessmann Vitotronic 200 - WO1C User Manual - Dutch - 112 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viessmann Vitotronic 200 - WO1C Manual

Product: