813833
13
Zoom out
Zoom in
Previous page
1/112
Next page
13
Frost protection
Frost protection is ensured for your heat pump, DHW
cylinder and any buffer cylinder that may be instal-
led.
Note
In the following cases, frost protection is only guar-
anteed with a booster heater (on site):
Air/water heat pumps:
At temperatures below 15 °C
When there is a heat pump fault
Auxiliary heaters may include instantaneous heating
water heaters or oil/gas boilers.
Mechanical ventilation with Viessmann ventilation
unit
From 00:00 to 24:00 h: Mechanical ventilation in the
"Standard" operating status
Wintertime/summertime changeover
This changeover is automatic.
Date and time
The date and time were set by your contractor.
You can change the settings at any time to suit your
individual requirements.
Power failure
All settings are saved if there is a power failure.
Tips for saving energy
Saving energy on central heating/central cooling
Do not overheat your home. Every degree of room
temperature reduction saves up to 6 % on your heat-
ing bills.
Do not set your individual preferred temperature too
high, e.g. not above 20 °C: See page 26
Heat your home to the reduced temperature at night
or during regular absences (not applicable to under-
floor heating). To do so, adjust the time program for
central heating: See page 27.
Adjust the heating or cooling curves so that your
home is heated or cooled to your individual preferred
temperature all year round: See page 30.
To switch off functions that are not required (e.g.
central heating in summer), set the "Only DHW" and
"Standby mode" operating programs: See
pages 35 and 61.
To reduce room temperature during a short period of
absence (except for underfloor heating), set "Econ-
omy mode": See page 32.
If you are going away, set the "Holiday program":
See page 33.
During the period that you are away, the room tem-
perature will be reduced and DHW heating switched
off.
Saving energy on DHW heating
At night or during regular absences, heat the DHW to
a lower temperature. To do so, adjust the time pro-
gram for DHW heating: See page 35.
Switch on DHW circulation only for those times in
which you regularly use hot water. To do so, adjust
the time program for the DHW circulation pump: See
page 37.
Saving energy on mechanical ventilation (in con-
junction with a ventilation unit)
If you are absent for a short period, select "Econ-
omy mode" or the "Standard operation" operating
program. During this period, the ventilation level will
be reduced: See page 43 and 46.
If you are going away, set the "Holiday program":
See page 46.
During your absence, the ventilation level is reduced.
Utilisation of power generated on site (in conjunc-
tion with a photovoltaic system)
Use the power generated by your photovoltaic sys-
tem for your heating system: See page 48.
Utilising excess power (Smart Grid)
Utilise free or cheap excess power from the power
supply utility for your heating system: See page 49.
For additional energy saving functions of the heat
pump control unit, please contact your contractor.
Introductory information
Your system is preset at the factory (cont.)
5817913
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann Vitotronic 200 - WO1C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann Vitotronic 200 - WO1C in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann Vitotronic 200 - WO1C

Viessmann Vitotronic 200 - WO1C User Manual - German - 112 pages

Viessmann Vitotronic 200 - WO1C User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info