813773
15
Zoom out
Zoom in
Previous page
1/44
Next page
15
Note
For further information on the ViGuide mobile app: See
www.viguide.info
In order to connect, you may need to remove the
Vitotrol from the mounting base.
1. On the heat pump control unit, enable low power
radio.
Vitocal operating instructions
2. Install the ViGuide mobile app from the Apple App
Store or Google Play Store on a mobile device.
3. Launch the ViGuide mobile app.
4. To register, follow in the instructions in the app.
5. Assign the Vitotrol 100-EH to the heat pump via
the ViGuide mobile app.
6. Assign the Vitotrol 100-EH to the required heating
circuit, cooling circuit or heating/cooling circuit via
the ViGuide mobile app.
Note
Any subsequent change can be made only via the
ViGuide mobile app.
Commissioning the Vitotrol 100-EH
Note
The Vitotrol 100-EH must always be commissioned
with the ViGuide mobile app, both for connected and
non-connected systems.
The Vitotrol needs to be commissioned in the following
cases:
When the Vitotrol is installed for the first time.
When the heat pump's TCU communication module
has been replaced.
When the Vitotrol is reset to factory settings.
On the screen, "SW VERS" is displayed with the soft-
ware version of the device.
Press the following buttons:
01. OK for "LANGUAGE"
02. / to set the required language.
03. OK to confirm.
"FORMAT" is displayed.
04. / to select the required time format.
05. OK to confirm.
"WEEK TYPE" is displayed.
06. / to select whether days of the week
should be displayed as "NUMBER" or "WORD".
07. OK to confirm.
"STARTPAIR" is displayed.
08. OK to confirm.
"PAIRING" is displayed.
While the connection to the heat pump is being
established, a percentage progress indicator
"PROC" is displayed.
09. Launch the ViGuide mobile app.
10. Follow the instructions in the app to establish the
connection to the heat pump.
Note
To cancel the connection attempt, press .
The connection attempt is displayed via a pro-
gress bar in percent.
It can take up to 6 minutes to establish the con-
nection.
The settings on the heat pump are transferred to
the Vitotrol 100-EH during commissioning.
If the connection to the heat pump could not be
established, the Vitotrol 100-EH display will
show "RETRY". Restart the attempt by pressing
OK.
Commissioning
Connecting the Vitotrol to the heat pump
6197279
Commissioning
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann Vitotrol 100-EH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann Vitotrol 100-EH in the language / languages: English as an attachment in your email.

The manual is 1.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann Vitotrol 100-EH

Viessmann Vitotrol 100-EH User Manual - German - 44 pages

Viessmann Vitotrol 100-EH User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info