558323
12
Zoom out
Zoom in
Previous page
1/24
Next page
12
03. Use / to select "Settings".
04. Confirm with OK.
05. Use / to select "Programs".
06. Confirm with OK.
07. Use / to select the program you want to change
(e.g. "Prog 1").
08. Confirm with OK.
09. Use / to select "Set".
10. Confirm with OK.
11. Use / to select the required group of days/single
day.
12. Confirm with OK.
13. Use / to select the required time phase, or first
the required day.
14. Use / to set the required start time, stop time
and room temperature (e.g."Reduced") in suc-
cession.
15. Confirm each respectively with OK.
16. Proceed as described in points 11 to 13 to set fur-
ther time phases.
Note
If the settings create gaps between the time pha-
ses, these are closed automatically by extending
the preceding time phase.
Deactivating time phases
To deactivate a time phase, set the same value for the
start and the stop time.
Copying time programs
You can copy time programs, for example if you want
to create a new time program based on an existing
one with only minor differences.
01. Open the flap.
02. Press twice.
03. Use / to select "Settings".
04. Confirm with OK.
05. Use / to select "Programs".
06. Confirm with OK.
07. Use / to select the program you want to change
(e.g. "Prog 1").
08. Confirm with OK.
09. Use / to select "Copy from".
10. Confirm with OK.
11. Use / to select the program you want to copy.
12. Confirm with OK.
13. Use / to select "Set", to make the changes.
Frost protection mode
If you do not want to heat the interior but would like to
have frost protection.
If the room temperature falls below 5 °C, central heat-
ing starts.
1. Open the flap.
2. Press twice.
3. Use / to select "Frost pr."
4. Confirm with OK.
The display shows and the current room temper-
ature.
Operation with constant room temperature (manual)
Continuous central heating with the set temperature
1. Open the flap.
2. Press twice.
3. Use / to select "Manual".
4. Confirm with OK.
5. Use / to set the required room temperature (min.
10 °C).
Central heating
Selecting the operating mode (cont.)
5592618
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann Vitotrol 100 - UTDB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann Vitotrol 100 - UTDB in the language / languages: English as an attachment in your email.

The manual is 0.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann Vitotrol 100 - UTDB

Viessmann Vitotrol 100 - UTDB User Manual - German - 24 pages

Viessmann Vitotrol 100 - UTDB User Manual - Dutch - 24 pages

Viessmann Vitotrol 100 - UTDB Installation Guide - Dutch - 20 pages

Viessmann Vitotrol 100 - UTDB User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info