558324
30
Zoom out
Zoom in
Previous page
1/32
Next page
30
The equipment can be cleaned with a
commercially available domestic clean-
ing agent (non-scouring).
Energy saving tips
Use the Vitotrol 100 setting options:
Do not overheat your rooms.
Every degree of room temperature
reduction saves up to 6% of your heat-
ing bills.
Never set your room temperature
higher than 20 °C (see page 13).
Select the program that meets your
current requirements:
For short absences (e.g. shopping
trips), select "Economy mode"
(see page 17).
As long as economy mode is activa-
ted, the room temperature is
reduced and DHW heating is off.
If you are going away, set the "Hol-
iday program" (see page 15).
As long as the holiday program is
activated, the room temperature is
reduced and DHW heating is off.
If you don't want to heat the rooms
and you don't require DHW for an
extended period, select operating
mode "Frost pr." (see page 12).
Further recommendations:
Correct ventilation/airing.
Briefly open windows fully and at the
same time close the thermostatic radi-
ator valves.
Close roller shutters (if installed) at
dusk.
Set thermostatic valves correctly.
Never cover radiators or thermostatic
valves.
Controlled DHW consumption: A
shower generally uses less energy
than a full bath.
Appendix
Cleaning
5592 620 GB
30


Need help? Post your question in this forum.

Forumrules
1

Forum

viessmann-vitotrol-100---utdb-rf2

Reset search

  • Thermostat won’t drop below 18 have tried reset but no change Submitted on 24-10-2022 at 12:52

    Reply Report abuse
  • I am trying to change the on / off time settings for the heating but it won't save the changes Submitted on 6-12-2021 at 15:39

    Reply Report abuse
  • how can i alter the control to stop the heating system working every time i put the boiler on? i only switch it on for hot water to save money, but the radiators come on too? i seem not to be able to alter the manual setting....
    any advice would be very appreciated.
    thank you Submitted on 19-8-2021 at 18:43

    Reply Report abuse
    • Hi, Having the same problem with the stat resetting at random times and the heating coming on. New batteries have been installed. Answered on 1-9-2022 at 14:45

      Vote up Report abuse
  • heating control set for prog 1 batteries strong time set correc t heating does not come on at correct times Submitted on 23-10-2018 at 21:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann VITOTROL 100 - UTDB-RF2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann VITOTROL 100 - UTDB-RF2 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann VITOTROL 100 - UTDB-RF2

Viessmann VITOTROL 100 - UTDB-RF2 Installation Guide - English - 16 pages

Viessmann VITOTROL 100 - UTDB-RF2 Installation Guide - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info