652096
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
5696 675 - 06
Vitocell 300-H, EHA Series Installation
Connections
Control Connections
1. Install reducing coupling (included in (Connection
Fitting Package). Use approved pipe sealant.
2. Install sensor well using sealant.
Where Vitotronic 200 or 300 is utilized to control DHW
production:
3. Insert DHW tank temperature sensor (supplied with
Vitotronic 200 or 300) fully and completely into
sensor well.
Due to the length of the stainless steel well (15” (380
mm)), care must be taken to ensure that the sensing
bulb of the limit is inserted and pushed to the end of
the stainless steel well.
Where a Vitotronic 100 and a Viessmann Power/Pump
Control Module are utilized to control DHW production:
4. Insert the extended capillary of the aquastat
(supplied with Viessmann Power/Pump Control
Module, not illustrated) fully and completely into
sensor well. Mount aquastat inconspicuously on tank
paneling. Follow instructions below with regard to
sensor and spring clip installation.
...if aquastat is to be mounted remote from the
aquastat well:
5. Align sensor bulb with spring clip.
6. Slide assembly into well.
7. The retention spring clip must press the bulb
properly to ensure surface contact with the well.
... if aquastat is to be mounted directly on the tank well,
8. Mount aquastat with holding clip supplied directly
onto well. Bend capillary tube into groove opening
to allow for mounting of aquastat.
IMPORTANT
WARNING
To ensure optimum, safe operation, the supplied
stainless steel well must be installed. The well
diameter is large enough to accommodate a wide
variety of sensing bulbs.
Always use spring clip to ensure proper contact of
capillary bulb against the stainless steel well for
proper sensing/heat transfer!
Not present on 42 and 53 USG
(160 and 200 L) version
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann Vitocell 300-H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann Vitocell 300-H in the language / languages: English as an attachment in your email.

The manual is 2.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann Vitocell 300-H

Viessmann Vitocell 300-H User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info