813784
39
Zoom out
Zoom in
Previous page
1/72
Next page
39
Dependent upon the design of the heat generator, at
the lower or upper edge of the control unit, a Light-
guide is displayed.
With various displays, the Lightguide explains the func-
tions of the control unit.
Meaning of the display:
Lightguide pulsates slowly:
Display is in standby mode.
Lightguide is illuminated constantly:
You are operating the control unit. Every input opera-
tion is confirmed by a brief flashing.
Lightguide flashes quickly:
There is a fault in the system.
In the delivered condition, the Lightguide is switched
on. You can switch off the Lightguide.
Tap the following buttons:
1.
2. "Settings"
3. "Display setting"
4. "Lightguide ON/OFF"
5. "ON"
Or
"OFF"
6. to confirm
Note
Faults are shown by flashing lights even if the Light-
guide is switched off.
Setting the signal tone for buttons
The signal tone that sounds when a button is tapped
on the display is switched off by default. You can
switch this signal tone on or off.
Tap the following buttons:
1.
2. "Settings"
3. "Buzzer"
4. "ON"
Or
"OFF"
5. to confirm
Naming heating/cooling circuits
You can name all heating/cooling circuits individually,
e.g. "Ground floor".
These names are used in the default displays and in
the main menu.
Note
The abbreviations 1, 2, 3, 4 will be retained in the
default display.
Tap the following buttons:
1.
2. "Settings"
3. "Rename heating/cooling circuit"
4. Select the required heating/cooling circuit, e.g.
"Heating/cooling circuit 1"
5. Type in the required name, e.g. "Ground floor" (1 to
20 characters).
6. to confirm
The name assigned to the relevant heating/cooling cir-
cuit is shown in the default display and in the main
menu.
Further adjustments
Switching the Lightguide on and off
6199646
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann VITOCAL 250-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann VITOCAL 250-A in the language / languages: English as an attachment in your email.

The manual is 4.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann VITOCAL 250-A

Viessmann VITOCAL 250-A User Manual - German - 80 pages

Viessmann VITOCAL 250-A User Manual - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info