813866

Viessmann ViCare wireless repeater Manual

9
Zoom out
Zoom in
Previous page
1/20
Next page
9
■Installation only in enclosed buildings
■The installation location must be dry and free of frost.
■Distance to floor: Min. 1.5 m
■Not near windows or doors
■Not above radiators
■Not near heat sources (direct sunlight, fireplace, TV
set, etc.)
■Ensure ambient temperatures between
+5 and +40 °C.
Note
■Check the reception quality of the ViCare climate
sensor at the planned installation location.
■Before installation, we recommend pairing the ViC-
are climate sensor near the appliance with Viess-
mann One Base or Vitoconnect, e.g. type OPTO2 or
the other ViCare components.
Wireless signal range
The range of wireless signals may be reduced by
walls, ceilings and interior fixtures. These weaken the
wireless signal.
The following circumstances can cause poor reception:
■On their way between transmitter and receiver, wire-
less signals are damped, e.g. by air or when pene-
trating walls.
■Wireless signals are reflected by metallic objects,
e.g. reinforcements embedded in walls, metal foil of
thermal insulation and thermal glazing with metal-
lised thermal vapour deposit.
■Wireless signals are isolated by service ducts and
lift shafts.
■Wireless signals are disrupted by devices that also
operate with high frequency signals. Maintain a dis-
tance of at least 2 m from these devices:
–Computers
–Audio and video systems
–Devices with active WiFi connection
–Electronic transformers
–Pre-ballasts
Angle of penetration
The reception quality remains best if wireless signals
hit the walls vertically.
Depending on the angle of penetration, the effective
wall thickness changes and so does the extent to
which the electromagnetic waves are damped.
Flat (unfavourable) angle of penetration
B
A
C
Fig. 3
AViCare climate sensor
BAppliance with Viessmann One Base or
Vitoconnect, e.g. type OPTO2
CWall
Ideal angle of penetration
C
B
A
Fig. 4
AViCare climate sensor
BAppliance with Viessmann One Base or
Vitoconnect, e.g. type OPTO2
CWall
Preparing for installation
Installation location for ViCare climate sensor
6155211
Installation
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann ViCare wireless repeater at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann ViCare wireless repeater in the language / languages: English as an attachment in your email.

The manual is 1.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info