652087
6
Zoom out
Zoom in
Previous page
1/8
Next page
6
Dieses Symbol neben dem Gleis kenn-
zeichnet eine Trennstelle (Gleichstrom
= rechte Schiene in Fahrtrichtung,
Wechselstrom = Mittelleiter).
This sign beside the track indicates a
track insulation (DC = right rail in driving
direction, AC = third rail).
Fig. 4
Abb. 4
DCC-
Magnetartikeldecoder
5212
Viessmann
Adresse
+
+
+
+
~~
J K 1
E
gnrt
4 3
2 gnrt
gnrtgn rt
Diode
16 V ~ / =
16 V ~ / =
5212
1,5 k, 1/4 W
1,5 k, 1/4 W
braun
grün
rot
blau
gelb
gelb
Digitalzentrale
Optional:
separater Anschluss
des Lichtstroms.
Widerstand
rot
Diode
Widerstand
blau
blau
blau
rot
schwarz
gelb
zum Gleis
2x rot
Anschluss:
Viessmann
Formsignale
m. 1 Antrieb
Anschluss:
Viessmann
Formsignale
m. 2 Antrieben
brown
green
red
blue
yellow
diode
resistor
Digital Command Station
Option:
separate power
supply for lights
/ yellow
red
diode
resistor
blue
/ blue
/ blue
red
black
/ yellow
to the rail
2x red
Connection:
Viessmann
semaphores
with 1 drive
Connection:
Viessmann
semaphores
with 2 drives
5. Adress-Einstellung
Legen Sie als erstes eine Digitaldresse fest. Le-
sen Sie dazu den folgenden Abschnitt und beach-
ten Sie Abb. 2. Nach Festlegung der Digitaladres-
se schließen Sie das Modell an, gemäß der Hin-
weise im Kapitel Anschluss.
Die Digital-Adresse ordnet den Decoder 4 aufei-
nander folgenden Tastenpaaren der Digitalzentra-
le zu. Die Adresseinstellung erfolgt über den mit
“Adresse” bezeichneten roten Drucktaster am Ma-
gnetartikeldecoder.
DCC-Digitaladresse zuweisen:
1. Decoders gemäß Abb. 2 anschließen (inkl. eine
Weiche an Ausgangsgruppe 1).
2. Digitalsystem einschalten.
3. Roten Taster am Decoder 1x drücken.
Die an Ausgang 1 angeschlossene Weiche
schaltet langsam hin und her. Der Decoder ist
5. Addressing
First determine which address you want to as-
sign to the decoder. Read the following chapter
and observe Figure 2. Once you have determined
the digital address, connect the module according
to the instructions given in the chapter “Electrical
connection”.
The digital address corresponds with 4 consecu-
tive pairs of buttons on the command station. Ad-
dressing is accomplished by pushing the red but-
ton marked “Address” on the accessory decoder.
Assigning a DCC address:
1. Wire the decoder according to Figure 2 (includ-
ing a turnout on output group 1).
2. Turn on the digital system.
3. Press the red button on the decoder once.
The turnout wired to output 1 will switch slowly
forwards and backwards. The decoder is now
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann 52121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann 52121 in the language / languages: English, German as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info