529138
10
Zoom out
Zoom in
Previous page
1/23
Next page
8
Switching on and off
Before switching on for the first time, check all connections and ensure that
the volume on your amplifier is turned down.
Push and release the Power button to switch the unit on or off. The LCD
display will light up when the unit is switched on.
Note If you leave the unit switched off for an extended period (around two
weeks or longer) you may need to re-tune the unit to restore the available
services.
You should now perform the tuning operation described below.
Using your DRX-601ESM
This section provides information on using the main functions of your DRX-601ESM including tuning,
selecting a service and altering the displayed information.
Tuning
Tuning the DRX-601ESM is very simple. In most cases you only need to
perform this operation once, when you first set up the unit. The tuning
facility has two modes:
Rapid - scans frequencies in the UK channel allocation. This should take
less than a minute.
Full - scans the full range of digital frequencies in Band III. This may take
several minutes.
1. Ensure your DRX-601ESM is switched on and your aerial is
connected and positioned correctly.
2. Push and release the Autotune button once for rapid mode and
twice for full mode. Note You can cancel Autotune by pushing the
Autotune button again during the tuning process.
The display will indicate tuning is underway. When finished, the
name of the first service found will be shown on the top line of the
display and you will hear it through your speakers. All the services
found are now stored in the unit and you can select a service as
described below.
Note
If no services are found the display will show the message NO
ENSEMBLES. Check your aerial connection and positioning and try the
tuning process again.
You may want to repeat this procedure in the future if you change your aerial
position or if you want to receive a newly introduced service.
Note If reception is poor, check the signal strength and try repositioning
your aerial using the signal strength indicator as described on page 9.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Videologic DRX-601ESM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Videologic DRX-601ESM in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info