785413
118
Zoom out
Zoom in
Previous page
1/145
Next page
20
5 Especificaciones, modelos de 150V
Controlador de carga SmartSolar MPPT 150/45 MPPT 150/60 MPPT 150/70
Tensión de la batería
Selección automática 12/24/48V (36V manual)
Corriente máxima de la batería
45A
60A
70A
Potencia FV nominal, 12V 1a,b)
650W
860W
1000W
Potencia FV nominal, 24V 1a,b)
1300W
1720W
2000W
Potencia FV nominal, 36V 1a,b) 1950W 2580W 3000W
Potencia FV nominal, 48V 1a,b) 2600W 3440W 4000W
Máxima corriente de corto circuito FV 2) 50A (máx. 30A por conector MC4)
Tensión máxima del circuito abierto FV 150 V máximo absoluto en las condiciones más frías
145 V en arranque y funcionando al máximo
Eficiencia máxima 98%
Autoconsumo
Menos de 35 mA a 12 V / 20 mA a 48 V
Tensión de carga de "absorción"
Valores predeterminados: 14,4 V / 28,8 V / 43,2 V / 57,6 V
(regulable)
Tensión de carga de "flotación"
Valores predeterminados: 13,8V / 27,6V / 41,4V / 55,2V
(regulable)
Tensión de carga de "ecualización"
Valores predeterminados: 16,2V / 32,4V / 48,6V / 64,8V
(regulable)
Algoritmo de carga
Variable multietapas (ocho algoritmos preprogramados) o
algoritmo definido por el usuario
Compensación de temperatura
-16mV/°C / -32mV/°C / -64mV/°C
Protección
Polaridad inversa de la batería (fusible, no accesible por el
usuario)
Polaridad inversa/Cortocircuito de salida/Sobretemperatura
Temperatura de trabajo De -30 a +60 °C (potencia nominal completa hasta los 40 °C)
Humedad 95%, sin condensación
Altura máxima de trabajo 5.000 m (fpotencia nominal completa hasta los 2.000 m)
Condiciones ambientales
Para interiores, no acondicionados
Grado de contaminación
PD3
Puerto de comunicación de datos
VE.Direct o Bluetooth
Interruptor on/off remoto
(conector bifásico)
Relé (programable)
DPST Capacidad nominal CA: 240 VCA / 4A Capacidad nominal
CC: 4A hasta 35VCC, 1A hasta 60VCC
Funcionamiento en paralelo
Sí (no sincronizado)
CARCASA
Color Azul (RAL 5012)
Terminales FV 3) 35 mm² / AWG2 (modelos Tr),
o conectores MC4 dobles (modelos MC4)
Bornes de la batería 35 mm² / AWG2
Grado de protección IP43 (componentes electrónicos), IP22 (área de conexión)
Peso 3 kg
Dimensiones (al x an x p) Modelos Tr: 185 x 250 x 95 mm
Modelos MC4: 215 x 250 x 95 mm
NORMAS
Seguridad EN/IEC 62109-1, UL 1741, CSA C22.2
1a) Si se conecta más potencia FV, el controlador limitará la entrada de potencia.
1b) La tensión FV debe exceder Vbat + 5V para que arranque el controlador.
Una vez arrancado, la tensión FV mínima será de Vbat + 1V.
2) Una corriente de cortocircuito más alta podría dañar el controlador en caso de polaridad inversa de
polaridad inversa de la conexión de los paneles FV.
3) Valores predeterminados: OFF
4) Modelos MC4: se podrían necesitar varios pares de separadores para conectar en paralelo las cadenas de paneles solares
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron SmartSolar MPPT 150 45-Tr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron SmartSolar MPPT 150 45-Tr in the language / languages: English, German, Dutch, French, Swedish, Spanish as an attachment in your email.

The manual is 1.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info