785493
25
Zoom out
Zoom in
Previous page
1/32
Next page
Manual Skylla with universal input 23
4.14 Connecting a voltmeter
The remote-connector offers a possibility to connect a voltmeter. It is possible to
connect a digital as well as an analogue voltmeter. This output can only be used
when the voltage-sense is connected. The voltage at this output is equal to the
voltage measured at the point where the voltage sense wires are connected.
Connecting a voltmeter
Disconnect the mains voltage.
Make sure that the voltage sense wires are connected, see chapter 4.8.
Connect a black wire between the “-” connection of the voltmeter and “-VM” at
the remote connector.
Connect a red wire between the “+” connection of the voltmeter and “+VM” at
the remote connector.
Connect the mains voltage.
4.15 Connecting a ampèremeter
The remote connector offers a possibility to connect an ampèremeter, which
indicates the output current of the charger. For the 30A charger an ampèremeter,
which indicates 30A at 60mV input voltage is required. For the 50A charger an
ampèremeter, which indicates 50A at 60mV input voltage is required, likewise for
the 100A charger an ampèremeter, which indicates 100A at 60mV input voltage is
required.
Connecting an ampèremeter
Disconnect the mains voltage.
Connect a black wire between the “-” connection of the ampèremeter and “-
AM” at the remote connector.
Connect a red wire between the “+” connection of the ampèremeter and “+AM”
at the remote connector.
Connect the mains voltage.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Skylla-TG 24 50 (1 1) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Skylla-TG 24 50 (1 1) in the language / languages: English as an attachment in your email.

The manual is 0.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info