785493
20
Zoom out
Zoom in
Previous page
1/32
Next page
18 Manual Skylla with universal input
To change the boost-voltage:
Place DIP-switch 7 “Eq2” to the right and place DIP-switch 8 “R
boost” to the left. The charger switches into the boost-charge
mode.
Place DIP-switch 4 “fine” to the left position in order to accurately
adjust the output voltage.
Measure the boost-voltage on the charger output by using a
precision voltage meter.
Adjust the boost-voltage by turning the “V boost” potentiometer
until the recommended voltage is reached.
Replace DIP-switch 8 “R boost” to the right.
Correct the equalize time by moving DIP-switch 7 “Eq2” and 6 “Eq1”.
Place DIP-switch 4 “fine” to the right position. In this position the
output voltage is less sensitive to influence of temperature.
4.3 Adjusting the equalize-charging mode time
The duration of the equalize-charge mode can be changed to fit the specifications
of the battery. The duration of the equalize-charge mode can be set to 0, 4, 8 or
12 hours. When selecting 0 hours, the charger will skip the equalize-charge mode
and will directly switch into the float-charge mode. The standard equalize-time is 4
hours.
According to the table below the duration of the equalize-charge mode can be set
by moving the DIP-switches 7 “Eq2” and 6 “Eq1” in the corresponding way:
4.4 Diode-splitter charge voltage compensation.
If a diode-splitter (Victron Energy Argo) is connected to the Skylla
charger the charge voltage have to be raised to compensate for
the voltage loss over the diode-splitter.
If the voltage-sense option is used, do not use the diode-splitter
compensation. When both options are used simultaneously the
output voltage will be too high.
To select the diode-splitter option:
Place DIP switch 5 “split” to the left.
0 hours 4 hours 8 hours 12 hours
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Skylla-TG 24 50 (1 1) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Skylla-TG 24 50 (1 1) in the language / languages: English as an attachment in your email.

The manual is 0.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info