785507
7
Zoom out
Zoom in
Previous page
1/22
Next page
sluit de rode draad aan op de “+ Temp. sense”-aansluiting
sluit de zwarte draad aan op de “
-Temp. sense”-aansluiting - monteer de temperatuursensor op de plus- of minpool van de accu
bekijk het menu voor de werkelijke temperatuur
2.5.3. Op afstand bedienbare uitschakeling
Vanuit de fabriek zijn de afstandsbediening + en - verbonden met een jumper om de lader in te schakelen.
Om gebruik te maken van de afstandsbediening om de lader uit te schakelen, verwijder de jumper en verbind een draad met de
"afstandsbediening -" ingang.
Het schakelen van de "afstandsbediening -" ingang met het batterij voltage zal de lader inschakelen. Deze draad kan gebruikt
worden om een BMS aan te sluiten die gebruikt wordt voor lithium accu's om de lader te bedienen.
2.5.4. Gebruikersrelaisaansluitingen
Het gebruikersrelais wordt geactiveerd bij onderspanning van de accu (<11,8 V). De functie kan worden gebruikt voor elke
gewenste actie: het starten van een generator, het afgeven van een alarm, enz.
De vermogens van het relais zijn te vinden in de specificatie.
Tabel 1. Relaismodi
# Omschrijving Instelmenu #
0 Skylla-i gedrag: aan bij het opladen (geen fouttoestand) en accuspanning tussen laag- en
hoogspanningsinstellingen
12,13,14 en 15
1 Altijd uit
2 Temperatuur hoog (> 85 °C) 12 en 13
3 Accuspanning te laag
4 Egalisatie actief
5 Foutconditie aanwezig
6 Matig laag (< -20 °C)
7 Accuspanning te hoog 14 en 15
8 Acculader in druppelladen of opslag
AAN : CM aangesloten op NO
UIT : CM aangesloten op NC
2.6. Het elektriciteitsnet aansluiten
1. Controleer of de accu op de acculader is aangesloten.
2. Verwijder de grijze kap in het voorpaneel van de acculader om toegang te krijgen tot de AC-ingangsaansluiting, zie
Afbeelding 2.
3. Sluit de netaardingskabel (groen/geel) aan op de AC-ingangsaansluiting, aansluitklem.
4. Sluit de neutrale netkabel (blauw) aan op de AC-ingangsaansluitklem N.
5. Sluit de netkabel (bruin) aan op de AC-ingangsaansluiting L.
Skylla-IP65
Pagina 5 Installatie en bedrading
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Skylla IP65 12 70 (1 1) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Skylla IP65 12 70 (1 1) in the language / languages: Dutch as an attachment in your email.

The manual is 0.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info