785563
163
Zoom out
Zoom in
Previous page
1/192
Next page
17
EN NL FR DE ES SV IT Appendice
Procedura
È possibile impostare AC-in-1 con i DIP switch ds8, ds7 e ds6 (impostazione predefinita: 50A).
Procedura: impostare i DIP switch sul valore richiesto:
ds8 ds7 ds6
off = 6,3A (PowerAssist 11A, PowerControl 6A)
off off on = 10A (PowerAssist 11A, PowerControl 10A)
off on off = 12A (2,8kVA a 230V)
off on on = 16A (3,7kVA a 230V)
on off off = 20A (4,6kVA a 230V)
on off on = 25A (5,7kVA a 230V)
on on off = 30A (6,9kVA a 230V)
on on on = 50A (11,5kVA a 230V)
Più di 50 A: con il software VEConfigure
Annotazione: Le potenze nominali continue indicate dai costruttori per i piccoli generatori tendono ad essere
talvolta ottimistiche. In tal caso si dovrà impostare il limite di corrente ad un valore molto più basso rispetto
a quello che altrimenti sarebbe necessario in base ai dati specificati dal produttore.
È possibile impostare AC-in-2 in due passaggi tramite il DIP switch ds5 (impostazione predefinita: 16A).
Procedura: impostare ds5 sul valore richiesto:
ds5
off = 16A
on = 30A
Più di 30A: con il software VEConfigure o il Pannello Digitale Multi Control
5.5.1.2 Limitazione della corrente di carica (impostazione predefinita 75%)
Per una durata di vita ottimale della batteria, si deve applicare una corrente di carica equivalente al 10-20% della capacità in
ampere-ora.
Esempio: corrente di carica ottimale per un banco di batterie da 24V/500Ah: 50A a 100A.
Il sensore di temperatura fornito regola automaticamente la tensione di carica alla temperatura della batteria.
Se si necessita una carica più veloce e, di conseguenza, una maggior corrente:
- montare il sensore di temperatura fornito sulla batteria, poiché una carica molto veloce può condurre ad un notevole
innalzamento della temperatura del banco di batterie. La tensione di carica viene regolata sulla temperatura più elevata (cioè
abbassata) per mezzo del sensore di temperatura.
- il tempo di carica per la prima fase di carica sarà talvolta così breve che sarà più utile un tempo di assorbimento fisso (per
tempo di assorbimento fisso vedere ds5, passaggio 2).
Procedura
È possibile impostare la corrente di carica della batteria in quattro passaggi tramite i DIP switch ds4 e ds3 (impostazione
predefinita: 75%).
ds4 ds3
off off = 25%
off on = 50%
on off = 75%
on on = 100%
Nota: quando è attivo WeakAC, la corrente di carica massima viene ridotta dal 100% all'80% circa.
5.5.1.3 I DIP switch ds2 e ds1 non sono usati nel passaggio 1.
NOTA IMPORTANTE:
Se le ultime 3 cifre del firmware Multi rientrano nell'intervallo del 100 (quindi il numero di firmware è xxxx1xx (ove x è
un numero qualsiasi)), allora ds1 e ds2 sono usati per impostare un Multi in parallelo, stand-alone o trifase.
Consultare il manuale appropriato.
163


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Quattro 48 10000 140-100 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Quattro 48 10000 140-100 100 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 2.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info