785559
155
Zoom out
Zoom in
Previous page
1/192
Next page
9
EN NL FR DE ES SV IT Appendice
4. INSTALLAZIONE
L’installazione del presente prodotto deve essere effettuata solo da elettricisti qualificati.
4.1 Ubicazione
Installare il Quattro in luogo asciutto, ben ventilato e il più possibile vicino alle batterie. Attorno al dispositivo deve essere
lasciato uno spazio libero di almeno 10 cm per consentirne il raffreddamento.
Una temperatura dell’ambiente troppo elevata porta alle seguenti conseguenze:
- minor durata di vita
- corrente di carica inferiore
- potenza di picco inferiore o arresto completo dell’inverter.
Mai posizionare il dispositivo direttamente sopra le batterie.
Il Quattro è predisposto per il montaggio a muro. Ai fini del montaggio, infatti, nella sezione posteriore della custodia si trovano
due fori ed un gancio (vedere Appendice G). Il dispositivo può essere montato in posizione sia orizzontale che verticale. Per un
raffreddamento ottimale, si consiglia il posizionamento verticale.
Dopo l’installazione deve essere possibile accedere alle parti interne del
dispositivo.
La distanza tra il Quattro e le batterie deve essere la minore possibile in modo da contenere al massimo la perdita di tensione
nei morsetti della batteria.
Non installare il prodotto in ambienti sottoposti a temperature
elevate.
Accertarsi pertanto che nelle immediate vicinanze non vi siano
sostanze chimiche, elementi in plastica, tende e altri materiali
tessili, ecc.
Il Quattro è sprovvisto di fusibile CC interno. Installare il fusibile CC
all’esterno del Quattro.
4.2 Collegamento dei cavi di collegamento della batteria
Per sfruttare a pieno il potenziale del Quattro, utilizzare batterie con capacità sufficiente e cavi di collegamento della batteria di
sezione adeguata.
Vedere tabella:
12/5000/200
24/5000/120
48/5000/70
24/8000/200
48/8000/110
48/10000/140
48/15000/140
Capacità batterie consigliata
(Ah) 8002400 400-1400 200-800 400-1400 200-800 250 - 1000 400 - 1500
Fusibile CC consigliato
800A
400A
200A
500A
300A
400A
600A
Sezione consigliata (mm2) dei
morsetti di collegamento +/-
0 5 m*
2x 120 mm2
2x 50 mm2
1x 70 mm2
2x 70 mm2
2x 50 mm2
2x 50 mm2
2x 95 mm2
5 -10 m*
2x 95 mm2
2x 70 mm2
2x 120 mm2
2x 95 mm2
2x 95 mm2
2x 150 mm2
* ‘2x’ indica due cavi positivi e due cavi negativi.
Procedura
Per collegare i cavi della batteria seguire la seguente procedura:
Utilizzare una chiave di serraggio con isolamento per evitare di mettere in
cortocircuito la batteria.
Coppia massima: 14 Nm
- Rimuovere il fusibile CC.
- Allentare le quattro viti del pannello anteriore basso della parte anteriore dell’unità e rimuovere il pannello.
- Collegare i morsetti della batteria: + (rosso) sul morsetto destro e (nero) sul morsetto sinistro (vedere appendice A).
- Serrare i collegamenti dopo aver montato i componenti di fissaggio.
- Serrare i dadi a fondo per determinare una resistenza di contatto minima.
- Reinserire il fusibile CC solo dopo aver completato l’intera procedura di installazione.
155


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Quattro 12 5000 220-100 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Quattro 12 5000 220-100 100 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 2.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info