785559
43
Zoom out
Zoom in
Previous page
1/192
Next page
17
EN NL FR DE ES SV IT Bijlage
Procedure
AC-in-1 kan worden ingesteld met de DIP-schakelaars ds8, ds7 en ds6 (fabrieksinstelling: 50 A).
Procedure: stel de DIP-schakelaars in op de vereiste waarde:
ds8 ds7 ds6
off off off = 6,3 A (PowerAssist 11 A, PowerControl 6 A)
off off on = 10 A (PowerAssist 11 A, PowerControl 10 A)
off on off = 12 A (2,8 kVA bij 230 V)
off on on = 16 A (3,7 kVA bij 230 V)
on off off = 20 A (4,6 kVA bij 230 V)
on off on = 25 A (5,7 kVA bij 230 V)
on on on = 30 A (6,9 kVA bij 230 V)
on on on = 50 A (11,5 kVA bij 230 V)
Meer dan 50 A: met VEConfigure-software
Opmerking: Het door de fabrikant opgegeven continu vermogen van kleine aggregaten is soms aan de zeer
optimistische kant. De stroomgrens moet dan veel lager worden ingesteld dan uit de gegevens van de
fabrikant blijkt.
AC-in-2 kan in twee stappen worden ingesteld met DIP-schakelaar ds5 (fabrieksinstelling: 16 A).
Procedure: stel ds5 in op de vereiste waarde:
ds5
off = 16 A
on = 30 A
Meer dan 30 A: met VEConfigure-software of Digital Multi Control Panel
5.5.1.2 Begrenzing laadstroom (standaardinstelling 75%)
Voor een lange levensduur dient bij accu's een laadstroom van 10% tot 20% van de capaciteit in Ah te worden toegepast.
Voorbeeld: optimale laadstroom van een 24V/500Ah-accubank: 50 A tot 100 A.
De meegeleverde temperatuursensor past automatisch de laadspanning aan aan de accutemperatuur.
Als een snellere lading en dus een hogere stroom is vereist:
- De meegeleverde temperatuursensor dient te worden geplaatst op de accu, omdat snel opladen kan leiden tot een flinke
temperatuurstijging van de accubank. De laadspanning wordt aangepast aan de hogere temperatuur (d.w.z. worden verlaagd)
door de temperatuursensor.
- De bulkladingstijd zal soms zo kort zijn dat een vaste absorptietijd meer brengt (zie voor ‘vaste’ absorptietijd ds5, stap 2).
Procedure
De acculaadstroom kan worden ingesteld in vier stappen, met de DIP-schakelaars ds4 en ds3 (fabrieksinstelling: 75%).
ds4 ds3
off off = 25%
off on = 50%
on off = 75%
on on = 100%
Opmerking: als WeakAC is ingeschakeld, wordt de maximale laadstroom verlaagd van 100% naar ongeveer 80%.
5.5.1.3 DIP-schakelaars ds2 en ds1 worden niet gebruikt tijdens stap 1.
BELANGRIJKE OPMERKING:
Als de laatste 3 cijfers van de Multi-firmware in het bereik van 100 liggen (dus het firmwarenummer xxxx1xx is (x
staat voor een willekeurig nummer)), dan worden ds1 & ds2 gebruikt om een Multi in te stellen op standalone,
parallel- of driefasebedrijf. Raadpleeg hiervoor de betreffende handleiding.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Quattro 12 5000 220-100 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Quattro 12 5000 220-100 100 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 2.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info