785559
38
Zoom out
Zoom in
Previous page
1/192
Next page
12
5. CONFIGURATIE
- Instellingen mogen alleen worden gewijzigd door een gekwalificeerde
elektrotechnicus.
- Lees de aanwijzingen grondig door voordat u wijzigingen doorvoert.
- Tijdens het instellen van de lader moet de DC-zekering in de accuaansluitingen
worden verwijderd.
5.1 Standaardinstellingen: klaar voor gebruik
De Quattro wordt geleverd met standaardfabrieksinstellingen. Deze zijn in het algemeen geschikt voor toepassing van 1
apparaat.
De instellingen hoeven daarom niet te worden gewijzigd in geval van standalone-gebruik.
Waarschuwing: mogelijk is de standaard acculaadspanning niet geschikt voor uw accu’s! Raadpleeg de
documentatie van de fabrikant of vraag advies bij uw acculeverancier!
Quattro-standaardfabrieksinstellingen
Frequentie omvormer 50 Hz
Ingangsfrequentiebereik 45 - 65 Hz
Ingangsspanningsbereik 180 - 265 VAC
Omvormerspanning 230 VAC
Standalone / parallel / 3-fase standalone
AES (Automatic Economy Switch) uit
Aardrelais aan
Lader aan/uit aan
Laadkarakteristieken viertraps adaptief met BatterySafe-modus
Laadstroom 75% van de maximale laadstroom
Accutype Victron Gel Deep Discharge
(ook geschikt voor Victron AGM Deep Discharge)
Automatisch egalisatie laden uit
Absorptiespanning 14,4 / 28,8 / 57,6 V
Absorptietijd tot 8 uur (afhankelijk van bulkladingstijd)
Druppelladingsspanning 13,8 / 27,6 / 55,2 V
Opslagspanning 13,2 V (niet instelbaar)
Herhaalde absorptietijd 1 uur
Absorptieherhalingsinterval 7 dagen
Bulkbeveiliging aan
Aggregaat (AC-in-1) / walstroom (AC-in-2) 50 A/16 A (= regelbare stroomlimiet voor PowerControl en
PowerAssist-functies)
UPS-functie aan
Dynamische stroombegrenzer uit
WeakAC uit
BoostFactor 2
Programmeerbaar relais (3x) alarmfunctie
PowerAssist aan
Analoge/digitale ingangs-/uitgangspoorten programmeerbaar
Frequentiewisseling uit
Ingebouwde accumonitor optioneel
5.2 Uitleg bij de instellingen
Hieronder volgt een korte uitleg bij de instellingen die niet vanzelfsprekend zijn. Meer informatie vindt u in de help-bestanden
van de softwareconfiguratieprogramma’s (zie paragraaf 5.3).
Frequentie omvormer
Uitgangsfrequentie als er geen AC op de ingang aanwezig is.
Instelbaar: 50 Hz; 60 Hz
Ingangsfrequentiebereik
Ingangsfrequentiebereik dat door de Quattro wordt geaccepteerd. De Quattro synchroniseert binnen dit bereik met de spanning
die beschikbaar is op AC-in-1 (voorkeursingang) of AC-in-2. Als de synchronisatie is voltooid is de uitgangsfrequentie gelijk aan
de ingangsfrequentie.
Instelbaar: 45 65 Hz; 45 55 Hz; 55 65 Hz
Ingangsspanningsbereik
Spanningsbereik dat door de Quattro wordt geaccepteerd. De Quattro synchroniseert binnen dit bereik met de spanning die
beschikbaar is op AC-in-1 (voorkeursingang) of op AC-in-2. Als het terugleverrelais is gesloten is de uitgangsspanning gelijk
aan de ingangsspanning.
Instelbaar:
Ondergrens: 180 - 230 V
Bovengrens: 230 - 270 V
Omvormerspanning
Uitgangsspanning van de Quattro bij accubedrijf.
Instelbaar: 210 245 V
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Quattro 12 5000 220-100 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Quattro 12 5000 220-100 100 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 2.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info