785455
10
Zoom out
Zoom in
Previous page
1/99
Next page
When LOW is active, the output current is limited to max. 50% of the rated
output power.
7-stage charging cycle for lead acid batteries:
1. BULK
Charges the battery using the maximum current until the absorption voltage
is reached. At the end of the bulk phase, the battery will be about 80%
charged and ready for use.
2. ABS - Absorption
Charges the battery using a constant voltage and a decreasing current until it
is fully charged. See the above table for the absorption voltage at room
temperature.
Variable absorption time:
The absorption time is short (at least 30 minutes) if an almost fully charged
battery is connected and increases to 8 hours for a totally discharged battery.
3. RECONDITION
RECONDITION is an option for the NORMAL and HIGH charging programs
and can be selected by pressing the MODE button again after selecting the
desired charging algorithm.
During RECONDITION, the battery is charged to a higher voltage using a low
current (8% of the rated current). RECONDITION takes place at the end of
the absorption phase and ends after one hour or sooner once the higher
voltage has been reached.
The RECONDITION LED will be lit while charging and will blink during
RECONDITION.
Example:
For a 12/30 battery charger: the reconditioning current is 30 x 0.08 = 2.4A.
4. FLOAT
Float charging. Keeps the battery at a constant voltage and fully charged.
5. STORAGE
Storage mode. Keeps the battery at a lower constant voltage to limit gas
formation and corrosion of the positive plates.
6. READY (battery fully charged)
The battery is fully charged when the FLOAT or STORAGE LED is lit.
7. REFRESH
Slow self-discharging is prevented by automatically ‘refreshing’ the battery
with a brief absorption charge.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Phoenix Smart lader 24 25 (3) IP43 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Phoenix Smart lader 24 25 (3) IP43 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info