785451
63
Zoom out
Zoom in
Previous page
1/99
Next page
63
EN NL FR DE ES SV IT
4.13. Compensación automática de la tensión
El cargador compensa la caída de tensión de los cables de CC
aumentando gradualmente la tensión de salida si aumenta la
corriente de carga.
La compensación de tensión establecida es de 100 mV. La
compensación de tensión se amplia con la corriente de carga y se
añade a la tensión de salida. La compensación de tensión se basa en
2 cables de 1 metro, resistencia de contacto y resistencia de fusible.
Ejemplo de cálculo para el 12/50 (1+1):
La resistencia del cable R se puede calcular con la siguiente fórmula:
=×
Donde R es la resistencia en ohmios (Ω), ρ es la resistividad del
cobre (1,786 x 10^-8 Ωm a 25°C), l es la longitud del cable (en m) y A
es el área de la superficie del cable (en m²).
Una distancia muy habitual del cargador a la batería es 1 metro. En
este caso, la longitud del cable es de 2 metros (positivo y negativo).
Si se usa un cable 6 AWG (16 mm²), la resistencia del cable es:
 =1,786 ×10−8 × 2
16 ×10−6 = 2,24 Ω
Se recomienda instalar un fusible cerca de la batería. La resistencia de
un fusible estándar de 80 A es:
 = 0,720 Ω
Ahora se puede calcular la resistencia total del circuito con la siguiente
fórmula:
 = +
Por lo tanto:
 = 2,24 Ω + 0,720 Ω = 2,96 Ω
La compensación necesaria de la caída de tensión en el cable se
puede calcular con la siguiente fórmula:
=×
En la que U es la caída de tensión en voltios (V) e I es la corriente que
pasa por el cable en amperios (A).
Entonces, la caída de tensión será:
=50 × 2,96 Ω =148  para toda la corriente de carga de 50 A.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Phoenix Smart lader 12 50 (3) IP43 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Phoenix Smart lader 12 50 (3) IP43 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info