785450
4
Zoom out
Zoom in
Previous page
1/99
Next page
3. Quick user guide
A. Connect the battery charger to the battery or batteries.
B. Connect the battery charger to the wall socket using the AC cable (can be
ordered separately).
All the LEDs light up briefly and once the charger has been activated the
relevant status LEDs light up, depending on the status of the charger.
By default the charger starts up in normal mode and bulk.
C. If required, press the MODE button to select a different charging algorithm
(the battery charger remembers the mode when it is disconnected from the
power supply and/or battery).
After selecting reconditioning, the RECONDITION LED will light up and start
to blink when reconditioning is active.
The battery charger switches to LOW (low power) when the MODE button is
held down for 3 seconds. The LOW LED will then light up and remain lit, and
the maximum output current will be limited to 50% of the rated output power.
LOW mode can be deactivated by holding the MODE button down for
another 3 seconds.
D. The battery will be about 80% charged and ready for use when the
ABSORPTION LED lights up.
E. The battery will be fully charged when the FLOAT (trickle charging) or
STORAGE LED lights up.
F. You can now interrupt the charging at any time by disconnecting the power
supply to the charger.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Phoenix Smart lader 12 50 (1 1) IP43 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Phoenix Smart lader 12 50 (1 1) IP43 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info