785488
40
Zoom out
Zoom in
Previous page
1/96
Next page
39
victron energy
Regolazioni senza telecomando
AVVERTENZA: consultare sempre il fornitore
della batteria per accertarsi che le specifiche della
carica scelta siano idonee alla batteria ed
all’applicazione.
Rimuovere il pannello anteriore e scollegare la
batteria ed i sensori Tensione e Temperatura.
Collegare un voltmetro digitale alle uscite – e +1.
Corrente Bulk
Accendere tenendo premuti entrambi i tasti
&
.
Rilasciare i tasti.
Il LED Bulk lampeggia a intermittenza insieme
al LED di errore.
Premere
per "alto" e
per "basso".
Leggere i dati nel seguente modo:
Eliminare la prima cifra del DVM e moltiplicare
per 10, ad es.:
22.50V => ….2.50 => 25 Amp
15.00V => .....5.00 => 50 Amp
Spegnere il caricabatteria (off) per conservare in
memoria i dati.
Tensione di assorbimento e fluttuante
Accendere tenendo premuto il tasto
per
tensione di assorbimento e
per tensione
fluttuante.
Rilasciare i tasti.
Il LED della tensione d’assorbimento o
fluttuante lampeggia ad intermittenza insieme al
LED di errore.
Premere
per "alto" e
per "basso".
Leggere il voltmetro.
Spegnere il caricabatteria (off) per conservare in
memoria i dati.
Nota: in modalità di regolazione non viene
tenuto conto della compensazione del sensore di
temperatura.
Attenzione: se il caricabatteria non viene
spento dopo una regolazione, il nuovo valore
non viene salvato in memoria ma rimane sulle
uscite. Dopo 4 ore il caricabatteria continua la
sequenza normale con i valori precedenti. Ciò
può essere utile se è richiesta una tensione
alta forzata per recuperare un po' di energia in
una batteria "morta".
Ritorno ai parametri dal produttore
Accendere il caricabatteria.
Tenere premuti i tasti
e/o
spegnendo
contemporaneamente il caricabatteria (
off
).
L'apparecchio torna ai parametri.
Quando il caricabatteria è pronto
Collegare la batteria e, se presenti, i sensori di
tensione e temperatura.
Rimettere a posto il pannello anteriore.
20AT
20AT
20AT
20AT
PE earth connection
N AC input : Neutral
L AC input : Line
+ battery 1
+ battery 2
- battery
+ Trickle charge
- Trickle charge
+ Voltage sense
- Voltage sense
+ Temperature sense
- Temperature sense
Remote
co
nnector
<= =>
Regolazione max corrente Bulk
20AT
20AT
20AT
20AT
PE earth connection
N AC input : Neutral
L AC input : Line
+ battery 1
+ battery 2
- battery
+ Trickle charge
- Trickle charge
+ Voltage sense
- Voltage sense
+ Temperature sense
- Temperature sense
Remote
co
nnector
<= =>
Regolazione tensione fluttuante
20AT
20AT
20AT
20AT
PE earth connection
N AC input : Neutral
L AC input : Line
+ battery 1
+ battery 2
- battery
+ Trickle charge
- Trickle charge
+ Voltage sense
- Voltage sense
+ Temperature sense
- Temperature sense
Remote
co
nnector
<= =>
Regolazione tensione di
assorbimento
20AT
20AT
20AT
20AT
PE earth connection
N AC input : Neutral
L AC input : Line
+ battery 1
+ battery 2
- battery
+ Trickle charge
- Trickle charge
+ Voltage sense
- Voltage sense
+ Temperature sense
- Temperature sense
Remote
co
nnector
<= =>
Ripristino parametri predefiniti
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Phoenix acculader 12 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Phoenix acculader 12 50 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 1.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info