785426
46
Zoom out
Zoom in
Previous page
1/55
Next page
5
EN NL FR DE ES Appendix
4. Funcionamiento
4.1 Significado de los LED
LED Rojo
Definición
Resolución de problemas
●●●●●●●●
Encendido fijo
Sobrecarga
Reduzca la carga
●●●●----
Parpadeo lento
Batería baja
Recargue o sustituya la batería
Compruebe las conexiones del cable CC.
Compruebe la sección del cable, ya que puede ser
insuficiente.
Consulte en la sección 4.3 Protecciones y reinicios
automáticos el procedimiento de reinicio manual y automático.
----
Parpadeo rápido
Batería alta
Reduzca la tensión de entrada CC, compruebe que el
cargador no tenga algún fallo
------
Parpadeo doble
Temperatura
alta
Reduzca la carga y/o coloque el inversor en un sitio mejor
ventilado
------
Parpadeo único
rápido
Tensión de
ondulación CC
alta
Compruebe las conexiones del cable CC y la sección del
cable.
4.2 Modo ECO
Ponga el interruptor frontal en modo ECO para reducir el consumo eléctrico el
inversor funcione sin carga. Se apagará automáticamente tan pronto como detecte
que no hay ninguna carga conectada. Volverá a encenderse brevemente durante 2,5
segundos para comprobar si hay alguna carga. Si la potencia de salida excede el
nivel preestablecido, el inversor seguirá funcionando.
La potencia de activación mínima predeterminada en el modo ECO es de 15 vatios.
El intervalo de búsqueda predeterminado en modo ECO es de 2,5 segundos.
Tenga en cuenta que el valor requerido en modo ECO depende en gran medida del
LED verde
Estado
Resolución de problemas
●●●●●●●●
Encendido fijo
Inversor on
LED Rojo Off
Estado OK
LED rojo On o parpadeando:
El inversor sigue encendido, pero se apagará si la condición
empeora Ver el motivo del aviso en la tabla de LED rojo
●●
------ Parpadeo único
lento
Modo ECO
Si el inversor pasa continuamente de on a off con una carga
conectada, puede que la carga sea demasiado pequeña para
el ajuste actual del modo ECO. Incremente la carga o cambie
los parámetros del modo ECO (ajuste mínimo del modo ECO:
15W).
-
----- Parpadeo doble
rápido
Off y en espera
El inversor se ha apagado debido a que se ha activado una
protección. El inversor se reiniciará automáticamente tan
pronto como se eliminen todas las condiciones de alarma. Ver
el motivo por el que se ha apagado en el estado del LED rojo.
--------
Off
Inversor
apagado
LED rojo off
Compruebe el interruptor On/Off/ECO: debe estar en la
posición On o ECO.
Compruebe el conector on/off remoto.
Compruebe las conexiones del cable CC y los fusibles.
El fusible del inversor se ha fundido: debe enviar el inversor a
reparación.
LED rojo On o parpadeando
El inversor se ha apagado debido a que se ha activado una
protección. Ya no se reiniciará automáticamente. El LED rojo
indica el motivo por el que se ha apagado. Solucione el error y
reinicie el inversor poniendo el interruptor en Off y de nuevo en
On.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Phoenix 48 500 Omvormer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Phoenix 48 500 Omvormer in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info