785426

Victron Phoenix 48 500 Omvormer Manual

6
Zoom out
Zoom in
Previous page
1/55
Next page
3
EN NL FR DE ES Appendix
3.2 Connection to the battery
In order to utilize the full capacity of the product, batteries with sufficient capacity and battery
cables with sufficient cross section should be used. See table:
12/250
24/250
12/375
24/375
48/375
Minimum battery cap.
30 Ah
20 Ah
40 Ah
30 Ah
15 Ah
Internal DC fuse 60A 30A 25A 80A 40A 25A
Recommended DC cable cross-section (mm2)
0 – 1,5 m
4 mm²
2,5 mm²
6 mm²
4 mm²
2,5 mm²
1,5 – 3 m
6 mm²
4 mm²
10 mm²
6 mm²
4 mm²
12/500
24/500
12/800
24/800
48/800
Minimum battery cap.
60 Ah
40Ah
100 Ah
50 Ah
30 Ah
Internal DC fuse
120A
80A
200A
120A
60A
Recommended DC cable cross-section (mm
2
)
0 – 1,5 m
6 mm²
6 mm²
16 mm²
6 mm²
4 mm²
1,5 -3 m
10 mm²
10 mm²
25 mm²
10 mm²
6 mm²
12/1200
24/1200
Minimum battery cap.
150 Ah
60Ah
Internal DC fuse
200A
150A
0 – 1,5 m
25 mm²
10 mm²
1,5 -3 m
35 mm²
16 mm²
The inverters are fitted with an internal DC fuse (see table above for rating). If the DC cable length
is increased to more than 1,5m, an additional fuse or DC circuit breaker must be inserted close to
the battery.
Reverse polarity connection of the battery wires will blow the internal fuse and can damage the
inverter. The internal fuse it not replacable.
3.3 Connection to the load
Never connect the output of the inverter to another AC source, such as a household AC wall outlet
or a generator.
3.4 Remote on/off connector
A remote on/off switch can be connected to the two pole connecter. Alternatively, the left hand
contact of the connector can be switched to battery positive: useful in automotive applications,
wire it to the ignition contact.
Note that also the front switch needs to set to either On or ECO for the inverter to start.
3.5 Configuration
The inverter is ready for use with the factory settings (see specifications), and can be configured
with a computer (VE.Direct to USB interface cable needed), Apple and Android smartphones,
tablets and other devices (VE.Direct to Bluetooth Smart dongle needed).
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Phoenix 48 500 Omvormer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Phoenix 48 500 Omvormer in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info