785438
61
Zoom out
Zoom in
Previous page
1/86
Next page
5
EN NL FR DE ES SE Appendix
--------
Off
Modo ECO off
LED rojo apagado
Compruebe el modo operativo pulsando el pulsador una
vez.
Compruebe el conector On/Off remoto.
Compruebe las conexiones del cable CC y los fusibles.
LED rojo encendido o parpadeando
El inversor se ha apagado debido para su protección. Ya
no se reiniciará automáticamente. El LED rojo indica el
motivo por el que se ha apagado. Solucione el error y
reinicie el inversor poniendo el interruptor en Off y de
nuevo en On.
LED Rojo
Definición
Resolución de problemas
●●●●●●●●
Encendido fijo
Overload
Reduzca la carga
●●●●----
Parpadeo lento
Batería baja
Recargue o sustituya la batería
Compruebe las conexiones del cable CC.
Compruebe la sección del cable, ya que puede ser
insuficiente.
Consulte en la sección 4.2 Protecciones y reinicios
automáticos los detalles sobre los reinicios manual y
automático.
----
Parpadeo rápido
Batería alta
Reduzca la tensión de entrada CC, compruebe que el
cargador no tenga algún fallo
------
Parpadeo doble
Temperatura
alta Reduzca la carga y/o coloque el inversor en un sitio mejor
ventilado
------
Parpadeo sencillo
rápido
Tensión de
ondulación CC
alta
Compruebe las conexiones del cable CC y la sección del
cable.
3.4 Protecciones y reinicios automáticos
Overload
Algunas cargas, como motores o bombas, requieren elevadas cantidades de corriente de
entrada cuando tienen que arrancar. En tales circunstancias, es posible que la corriente de
arranque exceda la tensión de conmutación de red del inversor. En este caso, la tensión de
salida disminuirá rápidamente para limitar la corriente de salida del inversor. Si se excede
continuamente la tensión de conmutación, el inversor se apagará: espere 30 segundos y
reinicie.
Después de tres reinicios, seguidos de otra desconexión producida por sobrecarga en los 30
segundos siguientes al reinicio, el inversor se apagará y permanecerá apagado. Los LED
señalarán desconexión por sobrecarga. Para reiniciar el inversor, ponga el interruptor en Off
y de nuevo en On.
Tensión baja de la batería (ajustable)
El inversor se apagará cuando la tensión de entrada CC caiga por debajo del nivel de
desconexión por tensión baja de la batería. Tras un intervalo mínimo de 30 segundos, el
inversor se reiniciará si la tensión sube por encima del nivel de reinicio por tensión baja de la
batería.
Después de tres reinicios, seguidos de una desconexión producida por tensión baja de la
batería en los 30 segundos siguientes al reinicio, el inversor se apagará y no volverá a
intentarlo. Los LED señalarán desconexión por tensión baja de la batería. Para reiniciar el
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Phoenix 48 2000 Omvormer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Phoenix 48 2000 Omvormer in the language / languages: English, German, Dutch, French, Swedish, Spanish as an attachment in your email.

The manual is 0.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info