Entered when charger is started. Constant current is applied until nominal battery voltage is reached, depending on temperature and input voltage, after which constant power is
applied up to the point where excessive gassing is starting (14.4 V resp. 28.8 V, temperature compensated).
Battery Safe
The applied voltage to the battery is raised gradually until the set Absorption voltage is reached. The Battery Safe Mode is part of the calculated absorption time.
Absorption
The absorption period is dependent on the bulk period. The maximum absorption time is the set Maximum Absorption time.
Float
Float voltage is applied to keep the battery fully charged
Storage
After one day of float charge the output voltage is reduced to storage level. This is 13,2 V resp. 26,4 V (for 12 V and 24 V charger). This will limit water loss to a minimum when the
battery is stored for the winter season.
After an adjustable time (default = 7 days) the charger will enter Repeated Absorption-mode for an adjustable time (default = one hour) to ’refresh’ the battery.
4-fase-lading:
Bulklading
Deze start als de lader wordt ingeschakeld. Een constante stroom wordt toegepast tot de nominale accuspanning is bereikt, afhankelijk van de temperatuur en de ingangsspanning,
waarna een constante stroom wordt toegepast tot er overmatige gasvorming optreedt (14,4 V resp. 28,8 V, temperatuurgecompenseerd).
Battery Safe-modus
De op de accu toegepaste spanning wordt langzaamaan verhoogd tot de ingestelde absorptiespanning is bereikt. De Battery Safe-modus maakt onderdeel uit van de berekende
absorptietijd.
Absorptielading
De absorptieladingstijd hangt af van de bulkladingstijd. De maximale absorptieladingstijd is de ingestelde Maximale absorptietijd.
Druppellading
De druppelladingsspanning wordt toegepast om de accu volledig opgeladen te houden.
Opslaglading
Na een dag druppellading wordt de uitgangsspanning verlaagt tot het opslagladingsniveau. Dit is 13,2 V resp. 26,4 V (voor een12V- resp. 24V-lader). Hierdoor wordt het verlies van
water tot een minimum beperkt als de accugedurende de winter is opgeslagen.
Na een aanpasbare tijd (standaard = 7 dagen) start de lader in de Herhaaldelijke absorptie-modus gedurende een aanpasbare tijd (standaard = een uur) om de accu te ’verversen’.
Charge en 4 étapes:
Bulk
Saisi quand le chargeur est démarré. Un courant continu est appliqué jusqu'à ce que la tension nominale de la batterie soit atteinte, en fonction de la température et de la tension
d'entrée, après quoi une puissance constante est appliquée jusqu'au point où un gazage excessif débute (14,4V resp. 28,8V, température corrigée).
Battery Safe
La tension appliquée à la batterie augmente de manière graduelle jusqu’à ce que la tension d’absorption soit atteinte. Le mode «Battery Safe» fait partie de la durée d’absorption
calculée.
Absorption
La période d’absorption dépend de la période Bulk. La durée d’absorption maximale est celle qui est configurée.
Float
La tension Float est appliquée pour maintenir la batterie complètement chargée.
Tension
Après un jour de charge Float, la tension de sortie est réduite à un niveau de stockage. Ce qui représente resp 13,2V et 26,4V (pour un chargeur de12V et 24V). Ceci limitera au
minimum les pertes d’eau quand la batterie est stockée durant la saison hivernale.
Après une durée ajustable (par défaut = 7 jours), le chargeur va entrer en mode Absorption répétée pour une durée réglable (par défaut = 1 heure) pour «rafraîchir la batterie».
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Victron MultiPlus II 24 3000 70-32 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Victron MultiPlus II 24 3000 70-32 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.
The manual is 3.45 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
