785222
26
Zoom out
Zoom in
Previous page
1/40
Next page
Status LED Description
Off The Lynx Smart BMS is in hibernation or sleep mode
Orange on Initializing or shutdown
Orange blinking Delayed shutdown due to cooling down the pre-charge circuit
Green on Running, the contactor is closed
Green blinking Pre-charging
Green flashing at 3 seconds interval The Lynx Smart BMS is in standby mode
Green and red alternating System in bootloader mode (updating firmware)
Red flashing 1 time every 4 seconds Warning, see VictronConnect for more information
Red flashing 2 times every 4 seconds Battery communication error, check battery BMS cables
Red flashing 3 times every 4 seconds Undervoltage or overvoltage detected
Red flashing 4 times every 4 seconds Under-temperature or over-temperature detected
Red flashing 5 times every 4 seconds Pre-charge time out
Red flashing 6 times every 4 seconds Pre-charge high current
Red flashing 7 times every 4 seconds Probably wrong system voltage
Red flashing 8 times every 4 seconds Contactor current too high
Red flashing 9 times every 4 seconds Initializations error
Red flashing 10 times every 4 seconds Safety contactor failure
Red flashing 12 times every 4 seconds Internal supply error
Red flashing 14 times every 4 seconds Battery voltage not allowed
Alarm and error codes
The Lynx Smart BMS is equipped with Bluetooth for easy monitoring and setup via the VictronConnect app.
Lynx Smart BMS status VictronConnect
If the Lynx Smart BMS is connected to a GX device it can be monitored via the GX device and the VRM portal. This also includes
receiving alarms signals.
Lynx Smart BMS
Page 23 Operation Lynx Smart BMS
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Lynx Smart BMS 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Lynx Smart BMS 500 in the language / languages: English as an attachment in your email.

The manual is 3.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info