785549
28
Zoom out
Zoom in
Previous page
1/150
Next page
24
Problem
Cause
Solution
The charger is not
functioning
The AC input voltage or frequency
is out of range.
Ensure that the input voltage is
between 185 Vac and 265 Vac, and
that the frequency matches the
setting.
The thermal circuit breaker has
tripped.
Reset the 16A thermal circuit breaker.
The battery is not
being charged fully.
Incorrect charging current.
Set the charging current at between
0.1 and 0.2x battery capacity.
A defective battery connection.
Check the battery terminals.
The absorption voltage has been
set to an incorrect value.
Adjust the absorption voltage to the
correct value.
The float voltage has been set to
an incorrect value.
Adjust the float voltage to the
correct value.
The internal DC fuse is defective.
Inverter is damaged.
The battery is
overcharged.
The absorption voltage has been
set to an incorrect value.
Adjust the absorption voltage to the
correct value.
The float voltage has been set to
an incorrect value.
Adjust the float voltage to the
correct value.
A defective battery.
Replace the battery.
The battery is too small.
Reduce the charging current or use a
battery with a higher capacity.
The battery is too hot.
Connect a temperature sensor.
Battery charge
current drops to 0
when the
absorption voltage
is reached
Alt. 1: Battery overtemperature
(> 50°C)
- Allow battery to cool down
- Place battery in a cool environment
- Check for shorted cells
Alt 2: Battery temperature sensor
faulty
Unplug battery temperature sensor
from the EasyPlus.
Reset the EasyPlus by switching it off,
then wait for 4 seconds and switch it
on again
If the EasyPlus
now charges normally,
the battery temperature sensor is
faulty and needs to be replaced
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron EasyPlus 12 1600 70-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron EasyPlus 12 1600 70-16 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info