785549
25
Zoom out
Zoom in
Previous page
1/150
Next page
21
EN NL FR DE ES Appendix
ds3-ds4: Setting charge voltages
ds3-ds4
Absorption
Voltage
Float
Voltage
Storage
Voltage
Absorption
Time
(hours)
Suitable for
dS3=off
dS4=off
(default)
14.4
13.8
13.2
8
Gel Victron Deep
Discharge
Gel Exide A200
AGM Victron Deep
Discharge
dS3=on
dS4=off
14.1
13.8
13.2
8
Gel Victron Long Life
(OPzV)
Gel Exide A600
(OPzV)
Gel MK battery
dS3=off
dS4=on
14.7
13.8
13.2
5
AGM Victron Deep
Discharge
Tubular plate or
OPzS batteries in
semi-float mode
AGM spiral cell
dS3=on
dS4=on
15.0
13.8
13.2
6
Tubular plate or
OPzS batteries in
cyclic mode
Batteries with high antimony content can typically be charged with a lower absorption voltage than
batteries with low antimony content. (Please refer to our book Electricity on Boarddownloadable
from our website www.victronenergy.com for details and suggestions about charging batteries).
Contact your battery supplier for the correct charge voltages and change (with VE-configure) the
voltage settings if required.
The default charge current setting is 75% of the maximum charge current. This current will be too
high for most applications.
For most battery types the optimal charge current is 0.1-0.2x the battery capacity.
ds5: Inverter frequency
off = 50Hz on = 60Hz
ds6: Search Mode
off = off on = on
ds7: AC input current limit
off = 12 Amp on = 4 Amp
Store the settings by moving DIP switch 8 to onand back to off’.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron EasyPlus 12 1600 70-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron EasyPlus 12 1600 70-16 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info