785549
22
Zoom out
Zoom in
Previous page
1/150
Next page
18
WeakAC
Strong distortion of the input voltage can result in the charger hardly operating or not operating at
all. If WeakAC is set, the charger will also accept a strongly distorted voltage, at the cost of greater
distortion of the input current.
Recommendation: Turn WeakAC on if the charger is hardly charging or not charging at all (which is
quite rare!). Also turn on the dynamic current limiter simultaneously and reduce the maximum
charging current to prevent overloading the generator if necessary.
Not adjustable with DIP switches.
BoostFactor
Change this setting only after consulting with Victron Energy or with an engineer trained by Victron
Energy!
Not adjustable with DIP switches.
Programmable relay
By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event
of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery
voltage almost too low).
Not adjustable with DIP switches.
Near the connection terminals an LED illuminates when the relay is activated.
VEConfigure software
With VEConfigure software the relay can also be programmed for other purposes, for example to
provide a generator starting signal.
With VEConfigure, several other special application modes of operation can be programmed.
Example: A house or an office connected to the public mains, fitted with solar panels with energy
storage in batteries.
The batteries are used to prevent return delivery to the mains. During the day, redundant solar
energy is stored in batteries. This energy is used in the evenings and at night. An energy shortfall is
compensated by the mains. The EasyPlus converts the battery DC voltage to AC. The power is
always less than or equal to the power consumption, so that return delivery to the mains does not
occur. In the event of mains failure, the EasyPlus isolates the premises from the mains, which
become autonomous (self-sufficient). In this way, a solar energy installation or a combined micro-
scale heating and power plant can be economically used in areas with an unreliable mains supply
and/or financially unfavourable energy-return conditions.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron EasyPlus 12 1600 70-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron EasyPlus 12 1600 70-16 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info